Replacing Hdds; Checking Hdds; When The Primary Disk Fails; When An Auxiliary Disk Fails - Samsung SVR-1630 Installation Manual

Hide thumbs Also See for SVR-1630:

Table of Contents

SVR-1630

(3) HDD Managing Command

Add

Adds an HDD for recording. The HDD added is automatically formatted.

Add Used

Adds an HDD that has been used and formatted. There is no need to reformat. Only

possible when the HDD is added as a Primary Disk.

Remove

Removes the current HDD. HDDs can be reused without data loss by using the 'Add

Used' command.

Confirm Removed

Used when a removed HDD is still listed. ALL DATA WILL BE LOST!

1.2 Replacing HDDs

The DVR file system (VFS2) automatically detects bad sectors, and bad sectors detected are not used.

The cases below are for when an HDD fails or has some connection problems.

(1) When replaying is stopped, or the DVR is rebooted in a specific sector during playback, or when it is not

possible to search images by event.

(2) When recording is stopped and the "Disk Manager" shows the HDD type as [X]

When the primary HDD fails, none of the data in the connected HDDs can be used. So the failed HDD should

be replaced and all the connected HDDs should be removed, added and formatted again.

The failed auxiliary disk should be replaced and reinstalled in "Disk Manager". ("Add" -> "Format").

2004. 07. 2004 (v 1.0)

Appendix

Samsung Techwin

Table of Contents