Propane Fuel Connection - Dickinson P9000 Operating And Installation Instruction

Step - 5 Make whatever bends are necessary in the flexible pipe and
push into the deckfitting.
Step - 6 Attach the back mounting plate and secure the heater in
position.
WARNING: Do not install the external flue cap within 20 inches (500mm)
of a refueling fitting or fuel tank vent.
NOTE: If the cap is positioned close to an edge where it can get an upward
wind then it may give some turbulence to the air intake. If this position is in
the best spot then consider the cap guard part# 19-080 that has a shield to
block the upward winds.
13