Charging The Battery - Pentax W-821NX Basic Instruction Manual

[Charging the battery]

• The battery BP02 is not charged at our factory shipment. It must be changed before use.
• For BP02 charge, use the special BC03 charger.
[Connection of code]
Insert the output plug of the power supply code in Jack of the AC adaptor.
Å
Insert the output plug of the AC adaptor in Jack of the charger.
Ç
Insert the power supply plug of the power supply code in the outlet of AC power supply.
É
[Installation of battery]
Draw the battery to the lock lever side and put it on the battery pocket.
Å
The battery is firmly installed on the battery pocket.
Press down the battery and then slide it to the opposite direction of the lock lever.
Ç
The lock lever goes up, and the battery is fixed.
É
Under such a condition, if "Connection of the code" is done, the charge with the battery
Ñ
is begun.
[Detaching the battery]
Press the lock lever and slide the battery to the lock lever direction.
Å
Detach the battery packing from the battery pocket.
Ç
12