GE JT3500DF3WW Installation Instructions Manual page 2

CUTOUT FOR SINGLE OVENS IN WALL CABINET
NOTE: If the cabinet does not have a front frame and the sides are less than sA" (1.9 cm) thick, shim
both sides equally to establish the cutout width.
H
These ovens
are Not
approved for
stockoble
installations.
E _--T>
Opening
Between Inside
Walls Kust be
at Least 28-1/2"
(72.4 cm} Wide
Junction
BOX
Location
(junction
in adjacent
cabinet}
22" (55.9
D..= _
cm) _qin.to
Bottom of
Junction
BOX
.--L';'-
. - _ Cutout Depth
"1"-_--_ _____23 1/2"
(59.7 cm} klin.
Note: Allow
1/4" 10.64 cm}
clearances
from side
edges of oven
door.
_--._ B =====_
t
F
C
G
lr
t
Install two ovens in separate cutouts
Center Line Center Line
305" (77.5 cm}
I 30" models
I< -i
27" (6858 cm)
I 27" models
observe all observe all
dimensions and dimensions and
requirements requirements
"""""'_ ['_==" 2" {5.1 cm) IVlin.
Dimension Dimension Description 27" Single Oven 30" Single Oven
A Cabinet Width 27" (68.6 cm) 30" (76.2 cm)
B Cutout Width 25" (63.5 cm) min. 28½" (72.4 cm) min.
Cutout Height
25Y/' (64.1 cm) max.
27%" (70.2 cm) min.
28½" (71.4 cm) max,
i" (2.5 cm)
23" (50.8 cm) min.
1" (2.5 cm) min.
1" (2.5 cm) min.
Recommended
Cutout Location
from Floor
52-1/2" (826 cm)
I1
A -d
28%" (72,7 cm) max.
2F//' (69.2 cm) min.
27_A" (69.4 cm) max,
1VS' (1.75 cm)
23" (53.3 cm) min.
C
D
E
Overlap of Oven Over
Side Edges of Cutout
Clearance to
Adjacent Corners,
Drawers, Walls, etc.,
When Door Is Open
Overlap of Oven
Top of Cutout
Overlap of Oven
Bottom of Cutout
1" (2.5 cm) min.
flY/' (3,2 cm) for PT9050,
ZETIS and ZET1P)
I_A " (3.2 cm)
H Junction Box Location 83//' (22.2 cm) max. 9½" (24.1 cm) max.
right side only right side only
121BICUTOUT FOR SINGLE OVENS- UNDER COUNTER
NOTE: These ovens are only approved to be installed under the specific models as labeled on the unit.
Gas or Electric Cooktops May Be Installed Over This Oven,
See Cooktop Installation Instructions for Cutout Size,
See Label on Top of Oven for Approved Models, 240V/208V
Junction Box
Location (junction
box may be
in adjacent cabinet)
25" (63.5 cm)
Gas and Electrical Connections
for Gas Cooktop Must be Located
in an Adjacent Accessible
Location to the Right
MUST SUPPORT 220 ibm (9g kg) FOR SINGLE OVENS
MUST SUPPORT 400 Ibm (181 kg) FOR DOUBLE OVENS
Side-by-Side Installations
Install two ovens in separate cutouts.
Center Line Center Line
305" (775 cm} 50" models
b2T' (68.58 cm} 27" models
JL
Cutout - observe Cutout - observe
all dimensions and all dimensions and
requirements, requirements.
==="t_1 _ 2" (51 cm} Min
NOTE: One cooktop may be centered over either oven in
the side-by-side installation.
22" (55.9 cm) Min, 36" (91.4 crn)
Above Support
Platform Countertop
Height
_1
4" (10.2 Cm)
_ Toekick
Dimension
A
B
C
D
E
F
Dimension Description
Cabinet Width
Cutout Height
Unit Overlap Top
Unit Overlap Bottom
Unit Overlap Side Edges
Junction Box Location
27" Single Oven
25" (63.5 cm) min.
25_//' (64.1 cm) max.
275_ " (70.2 cm) rain.
28½" (71.4 cm) max.
i" (2.5 cm)
1" (2.5 cm)
1" (2.5 cm)
8_//' (22.2 cm) max.
right side only
30" Single Oven
28½" (72.4 cm) min.
28%" (72.7 cm) max.
27_A" (69.2 cm) min.
27YS' (69.4 cm) max.
1" 12.5 cm)
(1V/' (3.2 cm) for PT90S0
ZET1S and ZET1P)
I_A " (3.2 cm)
1VS' 11.75 cm)
9½" (24.1 cm) max.
right side only
Continue to Section 4.