GE JT1000DFBB Dimensions And Installation Information

9-1/2"
F
JT1000SF
GE 30" Built-In Single Wall Oven
®
Conduit
40"
Dimensions and Installation Information (in inches)
Most 30" Wall Cabinets can be used with
Conduit
this unit.
D
40"
Note: These ovens are not approved for
stackable installations. Cabinets installed
adjacent to wall ovens must have an adhesion
"
22
spec of at least a 194°F temperature rating.
D
Door handle protrudes 3" from door face.
Cabinets and drawers on adjacent 45° and 90°
walls should be placed to avoid interference
"
22
with the handle.
Electric wall ovens are not approved for
installation with a plug and receptacle. They
must be hard wired in accordance with
installation instructions.
Installation Information: Before installing,
consult installation instructions packed with
product for current dimensional data.
C L
2 x 4 or
Side-by-side installations rerquire at least 2"
equivalent runners
between cutouts.
level with bottom of cutout
and flush with sides of cutout
2 x 4 or
KW Rating
or solid bottom floor.
equivalent runners
240V 4.2
level with bottom of cutout
and flush with sides of cutout
208V 3.2
or solid bottom floor.
Breaker Size
240V 20 Amps
208V 20 Amps
MAX.
Junction box
location
Cutout depth
23-1/2" MIN
22" to
bottom of
Junction box
junction box
location
22" to
bottom of
junction box
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
B
C
30''
Cabinet
A – Overlap of oven at top of cutout
B – Overlap of oven over side of edges of cutout
Cabinet
C – Overlap of oven at bottom of cutout
A – Overlap of oven at top of cutout
Oven
B – Overlap of oven over side of edges of cutout
D – Overall depth with handle
C – Overlap of oven at bottom of cutout
E – Overall height with trim
Oven
F – Overall width
D – Overall depth with handle
E – Overall height with trim
F – Overall width
For answers to your Monogram
questions, visit our website at geappliances.com
or call GE Answer Center
Cutout width
28-1/2" MIN.
28-5/8" MAX.
A
Cutout height
B
27-1/4" MIN.
E
27-5/16" MAX.
C
Cutout height
27-1/4" MIN.
Recommended
27-5/16" MAX.
cutout location
from floor
32-1/2"
23" minimum
Recommended
door opening
cutout location
allowance
from floor
30''
32-1/2"
PT7050
JT5000
JT3000
JT1000
JT1000
PT7050
JT5000
JT3000
JT1000
3/4"
30"
1-1/4"
1"
Suitable
3/4"
bracing
27-3/16"
(must support 200 lbs.)
1-1/4" to support
runners
28-3/8"
29-3/4"
27-3/16"
28-3/8"
29-3/4"
® or GE appliance
® service, 800.626.2000.
F
F
E
Conduit
40"
D
"
22
23" minimum
door opening
allowance
C L
2 x 4 or
30" C L
equivalent runners
level with bottom of cutout
1"
and flush with sides of cutout
or solid bottom floor.
Suitable
bracing
(must support 200 lbs.)
to support
runners
* ADA qualified based
*
on Uniform Federal
Accessibility Standards
9-1/2"
9-1/2"
MAX.
Cutout depth
23-1/2" MIN
Junction box
location
22" to
Conduit
bottom of
40"
junction box
Cutout width
28-1/2" MIN.
28-5/8" MAX
D
B
"
22
30''
2 x 4 or
Cabinet
equivalent runners
level with bottom of cutout A – Overlap of oven at top of cutout
and flush with sides of cutout
B – Overlap of oven over side of edges of
or solid bottom floor.
C – Overlap of oven at bottom of cutout
Oven
D – Overall depth with handle
E – Overall height with trim
F – Overall width
Listed by
Underwriters
Laboratories
Specification Created 2/13
320232
A
C