Getting Started - Playing The Clavinova; Turning The Power On Or Off - Yamaha CLAVINOVA CLP- 685 Owner's Manual

Getting Started — Playing the Clavinova
This section explains how to set up and start using your Clavinova. Setup is so
simple, you can start playing right away.

Turning the Power On or Off

1.
Connect the power cord and AC adaptor (CLP-635 only).
685 675
First insert the plug of the power cord into the AC connector on this
instrument, then plug the other end of the cord into a proper AC outlet on
the wall. In some areas a plug adaptor may be provided to match the pin
configuration of the AC wall outlets in your area.
For more information on connecting the power cord, refer to the assembly
instructions on pages 113, 117, 119 or 123.
1-1
685 675
Connect the plugs of the AC adaptor in the order shown in the illustration.
DC IN jack (page 13)
1-2
DC plug
adaptor
14
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
645 635 665GP
[AC IN] connector
(page 13)
645 635 665GP
1-3
1-1
Power cord
AC
1-2
The shape of the plug and outlet differ
depending on the particular locale.
AC outlet
AC plug
CAUTION
When setting up the product,
make sure that the AC outlet
you are using is easily
accessible. If some trouble or
malfunction occurs,
immediately turn off the
power switch and disconnect
the plug from the outlet.
WARNING
• Use only the AC power cord
supplied with your
instrument. If the supplied
cord is lost or damaged and
needs to be replaced,
contact your Yamaha
dealer. The use of an
inappropriate replacement
can pose a fire and shock
hazard!
• The type of AC power cord
provided with your
instrument may be different
depending on the country
in which it is purchased. (In
some areas a plug adaptor
may be provided to match
the pin configuration of the
AC wall outlets in your
area.) Do NOT modify the
plug provided with your
instrument. If the plug does
not fit the outlet, have a
proper outlet installed by a
qualified electrician.
WARNING
Use the specified adaptor
(page 126) only. The use of
other adaptors may result in
irreparable damage to both
the adaptor and the
instrument.
NOTE
When disconnecting the power
cord/AC adaptor, first turn off
the power, then follow this
procedure in reverse order.