Table of Contents
Advertisement
Enjoying the Piano Performance
What you can do in the Piano Room
Item
Lid Position
Brightness
Touch
Reverb
Reverb
Depth
Master Tune
VRM
Damper Res.
String Res.
Aliquot Res.
Body Res.
Key Off Sample
Half Pedal Point
26
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
Icon
Determines how much the Lid is opened.
Adjusts the brilliance of sound.
Determines how the sound responds to your playing
strength. You should adjust this setting according to the
specific Voice you're playing or the particular Song you're
performing, as desired.
Determines the Reverb type which is applied to all the entire
sound including the keyboard performance, Song playback
and MIDI data input from an external MIDI device.
Adjusts the Reverb depth. When "Reverb" is set to "off" or a
value of "0," no effect is produced.
Fine tunes the pitch of the entire instrument. This function is
useful when you play this instrument along with other
instruments or CD music.
Turns the VRM effect on/off. For information about the VRM
function, refer to page 27. For details about the Piano Voices
compatible with VRM, refer to the "Preset Voice List" on
page 100.
Listening to the VRM Demo
You can hear the difference of
VRM On/Off by pressing the [
(Play/Pause) button while VRM On/
Off display is being displayed.
If you press the [
R
/
button while VRM is On, the Demo
Song of VRM On will play back. If you press the [
Pause) button while VRM Off, the Demo Song of VRM Off will
play back.
Determines the depth of the string resonance effect which is
applied when the damper pedal is pressed. This parameter
can be set when VRM is on.
Determines the depth of the string resonance effect which is
applied when a note on the keyboard is pressed. This
parameter can be set when VRM is on.
Adjusts the sympathetic vibrations of the Aliquot resonance
effect. For details about Aliquot, refer to "What is Aliquot?"
(page 27).
Adjusts the resonance of the piano itself, i.e. soundboard, the
sides, the frame and so on. This parameter can be set when
VRM is on.
Determines the volume of the key-off sound (the subtle sound
that occurs when you release a key) which is available only
for some Voices. For Voices to which this effect is applied,
refer to the Voice List (page 100).
Specify the point to which you must depress the right pedal
before the effect of "Sustain Continuously" begins to be
applied. This setting applies only to the "Sustain
Continuously" effect (page 87) that is assigned to the right
pedal.
Descriptions
R
/
K
]
K
] (Play/Pause)
Default
settings
Full
Differs
depending on
the Voice.
Medium
Differs
depending on
the Voice.
Differs
depending on
the Voice.
A3 = 440.0 Hz
On
/
] (Play/
R
K
5
5
5
5
5
0
Setting Range
Full, Half, Close
0 – 10
Soft2, Soft1,
Medium, Hard1,
Hard2, Fixed
Refer to the
Reverb Type
List (page 87)
0 – 127
A3 = 414.8 Hz –
466.8 Hz
(approx. 0.2 Hz
steps)
On, Off
0 – 10
0 – 10
0 – 10
0 – 10
0 – 10
-2 (effective with
the shallowest
press) – 0 – +4
(effective with the
deepest press)
Advertisement
Table of Contents
