Using Dual And Split Simultaneously - Yamaha CLAVINOVA CLP- 685 Owner's Manual

Playing Various Musical Instrument Sounds (Voices)

Using Dual and Split Simultaneously

1.
To enter the Dual and Split modes simultaneously, press
the [DUAL/SPLIT] button repeatedly so that the lamp
lights in orange.
Lit in orange
The Voice which is displayed at top is Voice R1, and the one in the middle
is Voice R2, and the one at bottom is Voice L.
2.
Select the Voices for layering and for the left-hand area.
2-1. Use the [
display.
2-2. Use the [<]/[>] buttons or the [VOICE] button to select the
desired Voice.
If you use the [VOICE] button to call up the Voice List display, press the
[ ] button to select a Voice, and then return to the previous display.
r
Use the [
and select Voices in the same way.
3.
Play the keyboard.
4.
Press the [DUAL/SPLIT] button to exit from the Dual and
Split mode.
The lamp of the [DUAL/SPLIT] button turns off.
34
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
2
2
]/[ ] buttons to highlight
u d
]/[ ] buttons to highlight
u d
1, 4
Voice R1
Voice R2
Voice L
(Voice R1) in the
(Voice R2) and (Voice L),
NOTE
The specified Split Point key is
included in the left-hand range.
NOTE
For the information on setting
the Split Point, refer to page 33.