Yamaha CLAVINOVA CLP- 685 Owner's Manual page 75

The following menu is shown only when you connect the USB wireless LAN adaptor to the USB [TO
DEVICE] terminal on this instrument.
Menus marked with * differ in the Wireless LAN Mode parameters between the two modes: "Infrastructure" and "Accesspoint. " The default setting for the Wireless
LAN Mode is "Infrastructure. "
To call up the desired parameter:
Press the [FUNCTION] button several times to select "System" menu, then use the [
parameter.
[>] [>]
[<] [<]
Utility Wireless LAN* Select
(In the Network
"Infrastructure"
mode)
Detail
Wireless LAN Wireless LAN
Option Mode
Initialize
Detail
[>] [>] [>]
[<] [<] [<]
(Networks)
Other SSID
Security
Password Set the Password.
Connect
DHCP
IP Address
Subnet Mask
Gateway
DNS Server1
DNS Server2
Save
Infrastructure Mode
Accesspoint Mode
Cancel
Execute
Host Name
Mac Address
Status
]/[ ]/[<]/[>] buttons to select the desired
u d
Description
Connect to an access point by
selecting the network.
Set the SSID.
Set the Security.
Connect using the settings in
"Other" display.
Set the wireless LAN detailed
settings. IP Address, Subnet
Mask, Gateway, DNS Server1,
DNS Server2 can be set when
DHCP is set to Off while cannot be
set when DHCP set to On. Use the
[<]/[>] buttons to select each
octet in the entry display, then
enter the value using the [ u ]/[ d ]
buttons. To finalize the setting,
press the [FUNCTION] button.
Save the settings in the "Detail"
display. Move the highlight to
"Save," then press the [>] button
to execute the Saving.
Determines whether the access
point is used for wireless LAN
connection (Infrastructure Mode)
or not (Accesspoint Mode).
Initialize the settings in the
wireless LAN display. Move the
highlight to "Execute," then press
the [>] button to execute the
initialization.
Set the Host name.
Display the MAC address of the
USB wireless LAN adaptor.
Display the error code of network
function.
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
Connections
Default
Setting range
setting
– –
– Up to 32 characters (half
size), alphanumeric
characters, marks
None None, WEP,
WPA-PSK (TKIP),
WPA-PSK (AES),
WPA2-PSK (AES),
WPA/WPA2 mixed PSK
– Up to 64 characters (half
size), alphanumeric
characters, marks
– –
On On/Off
0.0.0.0 0.0.0.0-255.255.255.255
0.0.0.0 0.0.0.0-255.255.255.255
0.0.0.0 0.0.0.0-255.255.255.255
0.0.0.0 0.0.0.0-255.255.255.255
0.0.0.0 0.0.0.0-255.255.255.255
– –
Infrastructure –
Mode
Cancel –
[CLP-****]- Up to 57 characters (half
[xxxxxx (MAC size) including
address lower alphanumeric
6 figure)] characters, the
"_" (underscore) and
"-" (hyphen) character.
– –
– –
75