Yamaha CLAVINOVA CLP- 685 Owner's Manual page 86

Voice Menu
To call up the desired parameter:
Turn on Dual, Split or Duo as necessary, select Voices as necessary, press the [FUNCTION] button several times to select
"Voice" menu, then use the [
[>] [>]
[<] [<]
Voice Edit (Voice names)*
Pedal Right
Assign
Center
Left
Balance* Volume
R2 – R1*
Volume L – R*
Detune*
86
CLP-685, CLP-675, CLP-645, CLP-635, CLP-665GP Owner's Manual
]/[ ]/[<]/[>] buttons to select the desired parameter.
u d
[>]
[<]
Harmonic Cont Produces a distinctive "peaky" tone by raising the
Resonance value of the Filter. This parameter can be set
for each of the R1/R2/L Voices when Dual/Split/Duo is on.
NOTE
Harmonic content may have little audible effect or not be
applied to some Voices.
Brightness Adjusts the brightness of the R1/R2/L Voices
independently.
Touch Sens. Determines the degree to which the volume level
changes in response to your touch on the keyboard (how
hard you play). Since the volume level of some Voices
such as Harpsichord and Organ do not change
regardless of how you play the keyboard, the default
setting for these Voices is 127.
RPedal Turns the Right pedal function on or off for each of the
R1/R2/L Voices. This parameter is useful when you want
to ensure, for example, that the pedal function affects the
right-hand performance but does not affect the left-hand
performance.
CPedal Turns the Center pedal function on or off for each of the
R1/R2/L Voices. This parameter is useful when you want
to ensure, for example, that the pedal function affects the
right-hand performance but does not affect the left-hand
performance.
LPedal Turns the Left pedal function on or off for each of the R1/
R2/L Voices. This parameter is useful when you want to
ensure, for example, that the pedal function affects the
right-hand performance but does not affect the left-hand
performance.
(Setting Assigns one of various functions (other than the original
display) one) to the Right pedal.
(Setting Assigns one of various functions (other than the original
display) one) to the Center pedal.
(Setting Assigns one of various functions (other than the original
display) one) to the Left pedal.
(Pop-up Adjusts the volume balance between R1 and R2 Voices
window) when Dual is on. After adjusting this with the [<]/[>]
buttons, press the [EXIT] button to exit from the pop-up
window.
(Pop-up Adjusts the volume balance between the left and right
window) keyboard sections when Split/Duo is on. After adjusting
via the [<]/[>] buttons, press the [EXIT] button to exit
from the pop-up window.
(Pop-up Detunes the R1 Voice and R2 Voice in Dual mode to
window) create a thicker sound.
On the display, move the slider rightward via the [>]
button will raise the R1 Voice pitch and lower the R2
Voice pitch, and vice versa. After adjusting this, press the
[EXIT] button to exit from the pop-up window.
Description Default setting Setting range
Differs depending -64 – +63
on the Voice or
Voice
combination.
Differs depending -64 – +63
on the Voice or
Voice
combination.
Differs depending 0 (softest) – 64
on the Voice or (largest changes in
Voice the level) – 127
combination. (which produces the
loudest volume
regardless of how
you play the
keyboard)
Differs depending On, Off
on the Voice or
Voice
combination.
Differs depending On, Off
on the Voice or
Voice
combination.
Differs depending On, Off
on the Voice or
Voice
combination.
SustainCont Refer to the Pedal
Function List
(page 87).
Sostenuto Refer to the Pedal
Function List
(page 87).
Rotary Speed Refer to the Pedal
(Mellow Organ), Function List
Vibe Rotor (page 87).
(Vibraphone), Soft
(other Voices)
Differs depending R2+10 – 0 –
on the Voice or R1+10
Voice
combination.
Differs depending L+10 – 0 – R+10
on the Voice or
Voice
combination.
Differs depending R2+20 – 0 –
on the Voice or R1+20
Voice
combination.