Page 1
DE | EN | FR Geo3P BEDIENUNGSANLEITUNG USER MANUAL MODE D‘EMPLOI www.geo-fennel.de www.geo-fennel.com www.geo-fennel.fr...
Page 2
Precision by tradition. Contents 1. Supplied with 2. Features 3. Operation 4. Safety notes SUPPLIED WITH • Self-levelling 3 Point Laser Geo3P • Multi-functional mount • Magnetic target • 3 x AA Alkaline battery • Padded carrying case • User manual FUNCTIONS...
Technical data Self-levelling range ±3,5° Accuracy ± 2 mm / 10 m Working range 30 m* Laser diode 635 nm Laser class Power supply 3 x AA Alkaline batteries Operating time 20 h Temperature range -10°C to +50° Protection class IP 54 Weight (instrument only) 0,5 kg...
A visual (blinking laser points) and audible alarm indicates that the unit was set up outside of the compensator range. Set it up on a more even surface! • Geo3P can be connected to a camera tripod or a floor-to-ceiling pillar by means of the 1/4“ thread (3). MULTI-FUNCTIONAL MOUNT Connect Geo3P to the multi-functional mount.
Fix it to horizontal or vertical frames, poles, pipes, ... by use of the fixing strap. Fix the instrument to a nail / screw with the hole of the multi-functional mount. EXAMPLE OF APPLICATION ACCURACY CHECK Set up instrument parallel to a wall at a distance of 10 m. Switch the instrument on. Mark a visible laser point “A”...
SAFETY NOTES SPECIFIC REASONS FOR ERRONEOUS MEASURING RESULTS Measurements through glass or plastic windows; dirty laser emitting windows; after the instrument has been dropped or hit. Please check the accuracy. Large fluctuation of temperature: If the instrument will be used in cold areas after it has been stored in warm areas (or the other way round) please wait some minutes before carrying out measurements.
INTENDED USE OF INSTRUMENT The instrument emits a visible laser beam in order to carry out the following measuring tasks (depending on the instru- ment): Setting up heights, horizontal and vertical planes, right angles. SAFETY INSTRUCTIONS · Follow up the instructions given in the user manual. ·...
Page 8
geo-FENNEL GmbH Technische Änderungen vorbehalten. Kupferstraße 6 All instruments subject to technical changes. D-34225 Baunatal Sous réserve de modifications techniques. Tel. +49 561 / 49 21 45 +49 561 / 49 72 34 info@geo-fennel.de 01/2016 www.geo-fennel.de Precision by tradition.