1. Manuals
  2. Brands
  3. B+B SmartWorx Manuals
  4. Network Router
  5. SE400 Series
  6. User manual

B+B SmartWorx SE400 Series User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SE400 Series
USER MANUAL

Advertisement

Table of Contents
loading

Related Manuals for B+B SmartWorx SE400 Series

Summary of Contents for B+B SmartWorx SE400 Series

  • Page 1 SE400 Series USER MANUAL...
  • Page 2 SE400 SERIES Advantech B+B SmartWorx - Americas 707 Dayton Road Ottawa, IL 61350 USA Phone (815) 433-5100 Fax (815) 433-5105 Advantech B+B SmartWorx - European Headquarters Westlink Commercial Park Oranmore, Co. Galway, Ireland Phone +353 91-792444 Fax +353 91-792445 www.advantech-bb.com support@advantech-bb.com...

  • Page 3: Table Of Contents

    SE400 SERIES CONTENTS Product Overview............1 Supported Models..........................1 Specifications........................... 1 Hardware Views..........................3 Front View..........................3 Rear View ..........................8 Top View........................... 9 Bottom View..........................10 Switch Installation............12 Installation Guidelines........................12 Connecting Hardware ......................12 Verifying Switch Operation ......................12 Installing the Switch ........................
  • Page 4 SE400 SERIES System ............................36 IP Settings ..........................36 DHCP Client Option 82......................37 DHCP Auto Provision ......................38 IPv6 Settings........................... 38 Management VLAN ........................ 39 System Time........................... 40 L2 Switching ..........................41 Port Configuration........................41 Port Mirror..........................42 Link Aggregation........................43 802.1Q VLAN..........................
  • Page 5 SE400 SERIES Troubleshooting ............103 Advantech B+B Smartworx Technical support ..103...
  • Page 6 Figure 21: Removing an SFP Transceiver..................19 Figure 22: Ethernet Plug & Connector Pin Position................20 Figure 23: Power Wiring for SE400 Series ..................21 Figure 24: Grounding Connection...................... 22 Figure 25: Terminal Receptor: Relay Contact ................... 23 Figure 26: Terminal Receptor: Power Input Contacts................
  • Page 7 SE400 SERIES Figure 56: L2 Switching > GARP > GVRP Settings................50 Figure 57: L2 Switching > 802.3az EEE .................... 50 Figure 58: L2 Switching > Multicast > Multicast Filtering..............51 Figure 59: L2 Switching > Multicast > IGMP Snooping > IGMP Settings .......... 52 Figure 60: L2 Switching >...
  • Page 8 SE400 SERIES Figure 114: Diagnostics > System Log > System Log Server ............. 96 Figure 115: Diagnostics > DDM......................97 Figure 116: Diagnostics > DDM > Diagnostic Alarm Information ............97 Figure 117: Tools > IXM ........................98 Figure 118: Tools > Backup Manager....................99 Figure 119: Tools >...
  • Page 9 SE400 SERIES LIST OF TABLES Table 1: Standard Models ........................ 1 Table 2: Wide Temperature Models ....................1 Table 3: Specifications ........................1 Table 4: Front View .......................... 3 Table 5: Front View .......................... 4 Table 6: Front View .......................... 5 Table 7: Front View ..........................
  • Page 10 SE400 SERIES Table 56: L2 Switching > X-Ring Elite > X-Ring Elite Settings ............62 Table 57: L2 Switching > Loopback Detection > Global Settings............. 63 Table 58: L2 Switching > Loopback Detection > Port Settings............64 Table 59: MAC Address Table > Static MAC ................... 65 Table 60: MAC Address Table >...

  • Page 11: Fcc Class A

    SE400 SERIES DECLARATION OF CONFORMITY This product has passed the CE test for environmental specifications when shielded cables are used for external wiring. We recommend the use of shielded cables. This kind of cable is available from Advantech. Please contact your local supplier for ordering information.
  • Page 12 ENVIRONMENT. PRODUCT WARRANTY – LIMITED LIFETIME Effective for products of Advantech B+B SmartWorx shipped on or after May 1, 2013, Advan- tech B+B SmartWorx warrants that each such product shall be free from defects in material and workmanship for its lifetime. This limited lifetime warranty is applicable solely to the origi- nal user and is not transferable.
  • Page 13 20%. Soft- ware is not returnable if opened. Advantech B+B SmartWorx will not accept returns of prod- ucts that were modified by a customer. All custom orders are non-returnable and non- cancelable.

  • Page 14: Product Overview

    SE400 SERIES PRODUCT OVERVIEW Supported Models Standard Models: Table 1: Standard Models SE408 SEC410-2SFP SE416 SEC418-2SFP Wide Temperature Models: Table 2: Wide Temperature Models SE408-EI-T SE408-PN-T SE408-PNMA-T SE408-T SEC410-2SFP-EI-T SEC410-2SFP-PN-T SEC410-2SFP-T SE416-EI-T SE416-PN-T SE416-T SEC418-2SFP-EI-T SEC418-2SFP-PN-T SEC418-2SFP-T Specifications Table 3: Specifications...
  • Page 15 SE400 SERIES Table 3: Specifications (Continued) Specifications Description Environment Operating Standard Temperature: -10°C ~ 60°C (14°F ~ 140°F) Temperature Wide Temperature: -40°C ~ 75°C (-40°F ~ 167°F) Storage -40°C ~ 85° C (-40°F ~ 185° F) Temperature Ambient Relative 10 ~ 95% (non-condensing)

  • Page 16: Hardware Views

    SE400 SERIES Hardware Views Front View The following view applies to SE408 series. SE408 10/100 Figure 1: Front View Table 4: Front View Item Description System LED panel See “System LED Panel” on page 7 for further details. ETH port Eight 10/100BaseT(X) ports.

  • Page 17: Figure 2: Front View

    SE400 SERIES The following view applies to SE416 series. SE416 10/100 10/100 Figure 2: Front View Table 5: Front View Item Description System LED panel See “System LED Panel” on page 7 for further details. ETH port Sixteen 10/100BaseT(X) ports.

  • Page 18: Figure 3: Front View

    SE400 SERIES The following view applies to SEC410 series. SEC410-2SFP 10/100/1000 LNK/ACT 9 10 10/100 10/100/1000 Figure 3: Front View Table 6: Front View Item Description System LED panel See “System LED Panel” on page 7 for further details. ETH port Eight 10/100BaseT(X) ports + two 100/1000BaseT(X) combo ports.

  • Page 19: Figure 4: Front View

    SE400 SERIES The following view applies to SEC418 series. 10/100 SEC418-2SFP 10/100 10/100/1000 Figure 4: Front View Table 7: Front View Item Description System LED panel See “System LED Panel” on page 7 for further details. ETH port Sixteen 10/100BaseT(X) ports + two 100/1000BaseT(X) combo ports.

  • Page 20: Figure 5: System Led Panel

    SE400 SERIES System LED Panel Figure 5: System LED Panel Table 8: System LED Panel LED Name LED Color Description PW1 LED Solid green Powered up. Powered down or not installed. PW2 LED Solid green Powered up. Powered down or not installed.

  • Page 21: Rear View

    SE400 SERIES Rear View The following view applies to SE408 series. Figure 6: Rear View Table 9: Rear View Item Description DIN-Rail mounting Mounting plate used for the installation to a standard DIN rail. plate...

  • Page 22: Top View

    SE400 SERIES The following view applies to SE416, SEC410, SEC418 series. Figure 7: Rear View Table 10: Rear View Item Description DIN-Rail mounting Mounting plate used for the installation to a standard DIN rail. plate Top View The following view applies to SE408 series.

  • Page 23: Bottom View

    SE400 SERIES The following view applies to SE416, SEC410, SEC418 series. DC 12-48V PWR2 1A@24V PWR1 V1- V1+ P-Fail Figure 9: Top View Table 12: Top View Item Description Terminal block Connect cabling for power and alarm wiring. Bottom View The following view applies to SE408 series.

  • Page 24: Figure 11: Bottom View

    SE400 SERIES The following view applies to SE416, SEC410, SEC418 series. Figure 11: Bottom View Table 14: Bottom View Item Description Ground terminal Screw terminal used to ground chassis.

  • Page 25: Switch Installation

    Connecting Hardware These instructions will explain how to find a proper location for your Modbus Gateways, how to connect to the network, hook up the power cable, and connect to the SE400 Series. Verifying Switch Operation Before installing the device in a rack or on a wall, power on the switch to verify that the switch passes the power-on self-test (POST).

  • Page 26: Installing The Switch

    SE400 SERIES Installing the Switch DIN Rail Mounting The DIN rail mount option is the quickest installation option. Additionally, it optimizes the use of rail space. The metal DIN rail kit is secured to the rear of the switch. The device can be mounted onto a standard 35mm (1.37”) x 75 mm (3”) height DIN rail.

  • Page 27: Figure 13: Removing The Din-Rail

    SE400 SERIES Removing the DIN-Rail Mounting Kit Push the switch down to free the bottom of the plate from the DIN rail. Rotate the bottom of the device towards you and away from the DIN rail. Once the bottom is clear of the DIN rail, lift the device straight up to unhook it from the DIN rail.

  • Page 28: Wall-Mounting

    SE400 SERIES Wall-Mounting The wall mounting option provides better shock and vibration resistance than the DIN rail ver- tical mount. Note! When installing, make sure to allow for enough space to properly install the cabling. Before the device can be mounted on a wall, you will need to remove the DIN rail plate.

  • Page 29: Figure 15: Securing Wall Mounting Screws

    SE400 SERIES Locate the installation site and place the switch against the wall, making sure it is the final installation location. Use the wall mount plates as a guide to mark the locations of the screw holes. Drill four holes over the four marked locations on the wall, keeping in mind that the holes must accommodate wall sinks in addition to the screws.

  • Page 30: Installing And Removing Sfp Modules

    SE400 SERIES Installing and Removing SFP Modules Up to two fiber optic ports are available (dependent on model) for use in the switch. Refer to the technical specifications for details. The Gigabit Ethernet ports on the switch are 100Base SFP Fiber ports, which require using the 100M or 1G mini-GBIC fiber transceivers to work properly.

  • Page 31: Figure 18: Installing An Sfp Transceiver

    SE400 SERIES Position the SFP transceiver with the handle on top, see the following figure. Locate the triangular marking in the slot and align it with the bottom of the transceiver. Insert the SFP transceiver into the slot until it clicks into place.

  • Page 32: Removing Sfp Modules

    SE400 SERIES Removing SFP Modules To disconnect an LC connector, use the following guidelines: Press down and hold the locking clips on the upper side of the optic cable. Pull the optic cable out to release it from the transceiver.

  • Page 33: Connecting The Switch To Ethernet Ports

    SE400 SERIES Connecting the Switch to Ethernet Ports RJ45 Ethernet Cable Wiring For RJ45 connectors, data-quality, twisted pair cabling (rated CAT5 or better) is recom- mended. The connector bodies on the RJ45 Ethernet ports are metallic and connected to the GND terminal.

  • Page 34: Considerations

    A redundant power configuration is supported through a secondary power supply unit to reduce network down time as a result of power loss. SE400 Series support 12 and 48 VDC. Dual power inputs are supported and allow you to con- nect a backup power source.

  • Page 35: Grounding The Device

    SE400 SERIES Grounding the Device Caution! Do not disconnect modules or cabling unless the power is first switched off. The device only supports the voltage outlined in the type plate. Do not use any other power components except those specifically designated for the switch device.

  • Page 36: Wiring A Relay Contact

    SE400 SERIES By connecting the ground terminal by drain wire to earth ground the switch and chassis can be ground. Note! Before applying power to the grounded switch, it is advisable to use a volt meter to ensure there is no voltage difference between the power supply’s negative out- put terminal and the grounding point on the switch.

  • Page 37: Figure 27: Removing A Terminal Block

    SE400 SERIES To wire the power inputs: Make sure the power is not connected to the switch or the power converter before proceeding. Loosen the screws securing terminal block to the terminal block receptor. Remove the terminal block from the switch.

  • Page 38: Figure 30: Securing A Terminal Block To A Receptor

    SE400 SERIES Align the terminal block over the terminal block receptor on the switch. Insert the terminal block and press it in until it is flush with the terminal block receptor. Tighten the screws on the terminal block to secure it to the terminal block receptor.

  • Page 39: Managing Switch

    SE400 SERIES MANAGING SWITCH First Time set up Overview The Industrial Ethernet Managed Switch is a configurable device that facilitates the intercon- nection of Ethernet devices on an Ethernet network. This includes computers, operator inter- faces, I/O, controllers, RTUs, PLCs, other switches/hubs or any device that supports the standard IEEE 802.3 protocol.

  • Page 40: Using The Graphical (Web) Interface

    SE400 SERIES Using the Graphical (Web) Interface The graphical interface is provided via a web server in the switch and can be accessed via a web browser such as Opera, Mozilla, or Internet Explorer. Note! JavaScript must be supported and enabled in your browser for the graphical interface to work correctly.
  • Page 41 SE400 SERIES  Negotiation: All copper ports and gigabit fiber ports in the managed switch are capable of auto-negotiation such that the fastest bandwidth is selected. Choose to enable auto- negotiation or use fixed settings. 100Mbps Fiber ports are Fixed speed only.

  • Page 42: Web Browser Configuration

    SE400 SERIES Web Browser Configuration The switch has an HTML based user interface embedded in the flash memory. The interface offers an easy to use means to manage basic and advanced switch functions. The interface allows for local or remote switch configuration anywhere on the network.

  • Page 43: Recommended Practices

    SE400 SERIES Recommended Practices One of the easiest things to do to help increase the security posture of the network infrastruc- ture is to implement a policy and standard for secure management. This practice is an easy way to maintain a healthy and secure network.

  • Page 44: Monitoring

    SE400 SERIES Monitoring Device Information The Device Information menu lists information, such as: System Name, System Location, MAC Address, Firmware version, and more, pertaining to the system. The information is for review only. To modify the device information, see the respective item within the user inter- face.

  • Page 45: Logging Message

    SE400 SERIES Table 16: Monitoring > Device Information (Continued) Item Description System Object ID Displays the base object ID of the switch. System Up Time Displays the time since the last switch reboot. Logging Message The Logging Message Filter page allows you to enable the display of logging message filter.

  • Page 46: Port Monitoring

    SE400 SERIES Port Monitoring Port Network Monitor is a bandwidth and network monitoring tool for the purpose of capturing network traffic and measuring of network throughput. The monitoring functionality includes listing of port statistics as well as port utilization. Port Statistics To access this page, click Monitoring >...

  • Page 47: Link Aggregation

    SE400 SERIES Link Aggregation The Link Aggregation function provides LAG information for each trunk. It displays member- ship status, link state and membership type for each port. To access this page, click Monitoring > Link Aggregation. The ensuing table for Link Aggregation Group Status settings are informational only: LAG, Name, Type, Link State, Active Member and Standby Member.

  • Page 48: Igmp Statistics

    SE400 SERIES IGMP Statistics The IGMP Statistics function displays statistical package information for IP multicasting. To access this page, click Monitoring > IGMP Statistics. Figure 38: Monitoring > IGMP Statistics The following table describes the items in the previous figure.

  • Page 49: System

    SE400 SERIES System IP Settings The IP Settings menu allows you to select a static or DHCP network configuration. The Static displays the configurable settings for the static option. To access this page, click System > IP Settings. Figure 39: System > IP Settings The following table describes the items in the previous figure.

  • Page 50: Dhcp Client Option 82

    SE400 SERIES DHCP Client Option 82 The DHCP Client Option 82 configurable Circuit ID and Remote ID feature enhances valida- tion security by allowing you to select naming choices suboptions. You can select a switch- configured hostname or specify an ASCII test string for the remote ID. You can also configure an ASCII text string to override the circuit ID.

  • Page 51: Dhcp Auto Provision

    SE400 SERIES DHCP Auto Provision The DHCP Auto Provision feature allows you to load configurations using a server with DHCP options. Through the remote connection, the switch obtains information from a configuration file available through the TFTP server. To access this page, click System > DHCP Auto Provision.

  • Page 52: Management Vlan

    SE400 SERIES The ensuing table for IPv6 Information settings are informational only: Auto Configuration, IPv6 In Use Address, IPv6 In Use Router, IPv6 Static Address, IPv6 Static Router and DHCPv6 Client. Management VLAN By default the VLAN is the management VLAN providing communication with the switch man- agement interface.

  • Page 53: System Time

    SE400 SERIES System Time To access this page, click System > System Time. Figure 44: System > System Time The following table describes the items in the previous figure. Table 27: System > System Time Item Description Enable SNTP Click the radio button to enable or disable the SNTP.

  • Page 54: L2 Switching

    SE400 SERIES Table 27: System > System Time (Continued) Item Description Daylight Saving Time Click the drop-down menu to enable or disable the daylight saving time set- tings. Daylight Saving Time Enter the offsetting variable in seconds to adjust for daylight saving time.

  • Page 55: Port Mirror

    SE400 SERIES Table 28: L2 Switching > Port Configuration (Continued) Item Description Flow Control Click the radio button to enable or disable the flow control function. Apply Click Apply to save the values and update the screen. The ensuing table for Port Status settings are informational only: Port, Edit (click to enter description), Enable State, Link Status, Speed, Duplex, FlowCtrl Config and FlowCtrl Status.

  • Page 56: Link Aggregation

    SE400 SERIES Link Aggregation Link Aggregation is a method for combining multiple network connections in parallel in order to increase throughput beyond the capability of a single connection, and to provide redundancy in case one of the links should fail.

  • Page 57: Figure 49: L2 Switching > Link Aggregation > Lag Port Settings

    SE400 SERIES Table 31: L2 Switching > Link Aggregation > LAG Management Item Description Type Click the radio button to specify the type mode: Static or LACP. Ports Click the drop-down menu to select designated ports: Port1-10. Apply Click Apply to save the values and update the screen.

  • Page 58: Figure 50: L2 Switching > Link Aggregation > Lacp Priority Settings

    SE400 SERIES LACP Priority Settings The LACP Priority Settings page allows you to configure the system priority for LACP. To access this page, click L2 Switching > Link Aggregation > LACP Priority Settings. Figure 50: L2 Switching > Link Aggregation > LACP Priority Settings The following table describes the items in the previous figure.

  • Page 59: 802.1Q Vlan

    SE400 SERIES The ensuing table for LACP Port Information settings are informational only: Port Name, Pri- ority, Timeout and Mode. 802.1Q VLAN The 802.1Q VLAN feature allows for a single VLAN to support multiple VLANs. With the 802.1Q feature you can preserve VLAN IDs and segregate different VLAN traffic.

  • Page 60: Figure 53: L2 Switching > 802.1Q Vlan > Pvid Settings

    SE400 SERIES PVID Settings The PVID Settings page allows you to designate a PVID for a selected port, define the accepted type and enable/disable the ingress filtering. To access this page, click L2 Switching > 802.1Q VLAN > PVID Settings.

  • Page 61: Figure 54: L2 Switching > 802.1Q Vlan > Port To Vlan

    SE400 SERIES Port to VLAN The Port to VLAN page allows you to add a port to a VLAN and select the related parameters. To access this page, click L2 Switching > 802.1Q VLAN > Port to VLAN. Figure 54: L2 Switching > 802.1Q VLAN > Port to VLAN The following table describes the items in the previous figure.

  • Page 62: Garp

    SE400 SERIES Port-VLAN Mapping To access this page, click L2 Switching > 802.1Q VLAN > Port-VLAN Mapping. The ensuing table for Port-VLAN Mapping Table settings are informational only: Port, Mode, Administrative VLANs and Operational VLANs. GARP The Generic Attribute Registration Protocol (GARP) is a local area network (LAN) protocol.

  • Page 63: 802.3Az Eee

    SE400 SERIES GVRP Settings The GVRP Settings page allows you to enable or disable the GVRP (GARP VLAN Registra- tion Protocol or Generic VLAN Registration Protocol) protocol which facilitates control of vir- tual local area networks (VLANs) within a larger network.

  • Page 64: Multicast

    SE400 SERIES Multicast SCADA Requirements Multicast forwarding allows a single packet to be forwarded to multiple destinations. The ser- vice is based on L2 switch receiving a single packet addressed to a specific Multicast address. Multicast forwarding creates copies of the packet, and transmits the packets to the relevant ports.

  • Page 65: Figure 59: L2 Switching > Multicast > Igmp Snooping > Igmp Settings

    SE400 SERIES IGMP Snooping IGMP Snooping is defined as the process of listening to Internet Group Management Protocol (IGMP) network traffic. IGMP Snooping allows a network switch to listen in on the IGMP con- versation between hosts and routers and maintain a map of which links need which IP multi- cast streams.

  • Page 66: Figure 61: L2 Switching > Multicast > Igmp Snooping > Igmp Static Groups

    SE400 SERIES The following table describes the items in the previous figure. Table 43: L2 Switching > Multicast > IGMP Snooping > IGMP Querier Item Description VLAN ID Select the VLAN ID to define the local IGMP querier. Querier State Select Disable or Enable to configure the VLAN ID (IGMP Querier).

  • Page 67: Figure 62: L2 Switching > Multicast > Mld Snooping > Mld Settings

    SE400 SERIES MLD Snooping The MLD Snooping page allows you to select the snooping status (enable or disable), the ver- sion (v1 or v2) and the enabling/disabling of the report suppression for the MLD querier, which sends out periodic general MLD queries and are forwarded through all ports in the VLAN.

  • Page 68: Figure 63: L2 Switching > Multicast > Mld Snooping > Mld Querier

    SE400 SERIES MLD Querier The MLD Querier page allows you to select and enable/disable the MLD querier and define the version (IGMPv1 or IGMPv2) when enabled. To access this page, click L2 Switching > Multicast > MLD Snooping > MLD Querier.

  • Page 69: Jumbo Frame

    SE400 SERIES The ensuing table for MLD Static Groups Status settings are informational only: VLAN ID, Group IP Address, Member Ports and Modify. Multicast Groups To access this page, click L2 Switching > Multicast > MLD Snooping > Multicast Groups.

  • Page 70: Spanning Tree

    SE400 SERIES Spanning Tree The Spanning Tree Protocol (STP) is a network protocol to ensure loop-free topology for any bridged Ethernet local area network. STP Global Settings The STP Global Settings page allows you to set the STP status, select the configuration for a BPDU packet, choose the path overhead, force version and set the configuration revision range.

  • Page 71: Figure 67: L2 Switching > Spanning Tree > Stp Port Settings

    SE400 SERIES STP Port Settings The STP Port Settings page allows you to configure the ports for the setting, port’s contribu- tion, configure edge port, and set the status of the BPDU filter. To access this page, click L2 Switching > Spanning Tree > STP Port Settings.

  • Page 72: Figure 68: L2 Switching > Spanning Tree > Stp Bridge Settings

    SE400 SERIES STP Bridge Settings The STP Bridge Settings page allows you to configure the priority, forward delay, maximum age, Tx hold count, and the hello time for the bridge. To access this page, click L2 Switching > Spanning Tree > STP Bridge Settings.

  • Page 73: Figure 69: L2 Switching > Spanning Tree > Stp Port Advanced Settings

    SE400 SERIES STP Port Advanced Settings The STP Port Advanced Settings page allows you to select the port list to apply this setting. To access this page, click L2 Switching > Spanning Tree > STP Port Advanced Settings. Figure 69: L2 Switching > Spanning Tree > STP Port Advanced Settings The following table describes the items in the previous figure.

  • Page 74: Figure 71: L2 Switching > Spanning Tree > Mst Instance Id Settings

    SE400 SERIES MST Instance ID Settings The MST Instance ID Settings page allows you to edit the MSTI ID and VID List settings. To access this page, click L2 Switching > Spanning Tree > MST Instance ID Settings. Figure 71: L2 Switching > Spanning Tree > MST Instance ID Settings The following table describes the items in the previous figure.

  • Page 75: X-Ring Elite

    SE400 SERIES MST Instance Info To access this page, click L2 Switching > Spanning Tree > MST Instance Info. The ensuing table for STP Bridge Status settings are informational only: Bridge Identifier, Designated Root Bridge, Root Path Cost, Designated Bridge, Root Port and TCNLast Topol- ogy Change.

  • Page 76: Loopback Detection

    SE400 SERIES X-Ring Elite Groups The X-Ring Elite Groups page allows you to select the function and role for each device and the connected ports. To access this page, click L2 Switching > X-Ring Elite > X-Ring Elite Groups. Figure 74: L2 Switching > X-Ring Elite > X-Ring Elite Groups The ensuing table for Information settings is informational only: Ring ID, Role, Port 1, Port 2 and Delete (click to delete the desired Ring ID).

  • Page 77: Figure 76: L2 Switching > Loopback Detection > Port Settings

    SE400 SERIES Port Settings The Port Settings page allows you to select ports that are detected by the loopback detection function and configure their status (enabled or disabled). To access this page, click L2 Switching > Loopback Detection > Port Settings.

  • Page 78: Mac Address Table

    SE400 SERIES MAC Address Table The MAC Address Table provides access to the Static MAC Settings, MAC Aging Time, and Dynamic Forwarding. Static MAC The Static MAC page allows you to configure the address for forwarding of packets, the VLAN ID of the listed MAC address and the designated Port.

  • Page 79: Mac Aging Time

    SE400 SERIES MAC Aging Time The MAC Aging Time page allows you to set the MAC address of the aging time to study. To access this page, click MAC Address Table > MAC Aging Time. Figure 78: MAC Address Table > MAC Aging Time The following table describes the items in the previous figure.

  • Page 80: Security

    SE400 SERIES Table 61: MAC Address Table > Dynamic Forwarding Table (Continued) Item Description MAC Address Enter the MAC address to show or clear dynamic MAC entries. If a port, VLAN or MAC address is not selected the whole dynamic MAC table is dis- played or cleared.

  • Page 81: Figure 81: Security > Storm Control > Port Settings

    SE400 SERIES Port Settings The Port Settings page allows you to configure the port and the type of storm control associa- tion along with the value of the storm rate for the selected port. To access this page, click Security > Storm Control > Port Settings.

  • Page 82: Port Security

    SE400 SERIES Port Security The Port Security page allows you to configure port isolation behavior. To access this page, click Security > Port Security. Figure 82: Security > Port Security The following table describes the items in the previous figure.

  • Page 83: Dos Prevention

    SE400 SERIES The ensuing table for Protected Ports Status settings are informational only: Protected Ports and Unprotected Ports. DoS Prevention The DoS Prevention page allows you to set up (enabled or disabled) the denial of service. DoS Global Settings The DoS Global Settings page allows you to configure (enabled or disabled) the setting for each function.

  • Page 84: Table 66: Security > Dos Prevention > Dos Global Settings

    SE400 SERIES The following table describes the items in the previous figure. Table 66: Security > DoS Prevention > DoS Global Settings Item Description DMAC = SMAC Click Enabled or Disabled to define DMAC-SMAC for the DoS Global set- tings.

  • Page 85: Applications

    SE400 SERIES DoS Port Settings The DoS Port Settings page allow you to configure DoS security (enabled or disabled) for the selected port. To access this page, click Security > DoS Prevention > DoS Port Settings. Figure 85: Security > DoS Prevention > DoS Port Settings The following table describes the items in the previous figure.

  • Page 86: Figure 87: Security > 802.1X > 802.1X Settings

    SE400 SERIES The ensuing table for HTTP Information settings are informational only: HTTP Service and Session Timeout. 802.1x The 802.1x function provides port-based authentication to prevent unauthorized devices (cli- ents) from gaining access to the network. 802.1x Settings The 802.1x Settings page allows you to set the state (enabled or disabled) for the selected IP server address, port, accounting port and associated password, including a re-authentication period.

  • Page 87: Figure 88: Security > 802.1X > 802.1X Port Configuration

    SE400 SERIES 802.1x Port Configuration The 802.1x Port Configuration page allows you to identify the authorization state for a port by using a MAC or Port authentication base. To access this page, click Security > 802.1x > 802.1x Port Configuration.

  • Page 88: Qos

    SE400 SERIES The QoS function allows you to configure settings for the switch QoS interface and how the switch connects to a remote server to get services. General Traditionally, networks operate on a best-effort delivery basis, all traffic has equal priority and an equal chance of being delivered in a timely manner.

  • Page 89: Figure 90: Qos > General > Qos Settings

    SE400 SERIES QoS Settings Once the QoS function is enabled, you can configure the available settings. To access this page, click QoS > General > QoS Settings. Figure 90: QoS > General > QoS Settings The following table describes the items in the previous figure.

  • Page 90: Figure 91: Qos > General > Qos Scheduling

    SE400 SERIES Queue Scheduling The switch support eight CoS queues for each egress port. For each of the eight queues, two types of scheduling can be configured: Strict Priority and Weighted Round Robin (WRR). Strict Priority scheduling is based on the priority of queues. Packets in a high-priority queue are always sent first and packets in a low-priority queue are only sent after all the high priority queues are empty.

  • Page 91: Figure 92: Qos > General > Cos Mapping

    SE400 SERIES CoS Mapping The CoS Mapping allows you to apply CoS mapping. To access this page, click QoS > General > CoS Mapping. Figure 92: QoS > General > CoS Mapping The following table describes the items in the previous figure.

  • Page 92: Figure 93: Qos > General > Dscp Mapping

    SE400 SERIES DSCP Mapping The DSCP to Queue mapping function maps queue values in incoming packets to a DSCP value that QoS uses internally to represent the priority of the traffic. The following table shows the DSCP to Queue map.

  • Page 93: Figure 94: Qos > General > Ip Precedence Mapping

    SE400 SERIES IP Precedence Mapping The IP Precedence Mapping allows you to set IP Precedence mapping. To access this page, click QoS > General > IP Precedence Mapping. Figure 94: QoS > General > IP Precedence Mapping The following table describes the items in the previous figure.

  • Page 94: Qos Basic Mode

    SE400 SERIES QoS Basic Mode Quality of Service (QoS) allows to give preferential treatment to certain types of traffic at the expense of others. Without QoS, the switch offers best-effort service to each packet, regard- less of the packet contents or size sending the packets without any assurance of reliability, delay bounds, or throughput.

  • Page 95: Rate Limit

    SE400 SERIES Rate Limit Rate Limits features control on a per port basis. Bandwidth control is supported for the follow- ing: Ingress Bandwidth Control, Egress Bandwidth Control and Egress Queue. Ingress Bandwidth Control The Ingress Bandwidth Control page allows you to configure the bandwidth control for a listed port.

  • Page 96: Figure 98: Qos > Rate Limit > Egress Bandwidth Control

    SE400 SERIES Egress Bandwidth Control The Egress Bandwidth Control page allows you to set the egress bandwidth control for a listed port. To access this page, click QoS > Rate Limit > Egress Bandwidth Control. Figure 98: QoS > Rate Limit > Egress Bandwidth Control The following table describes the items in the previous figure.

  • Page 97: Management

    SE400 SERIES Table 81: QoS > Rate Limit > Egress Queue (Continued) Item Description CIR (Kbps) Enter the value in Kbps (16 to 1000000) to set the CIR rate for the Egress queue. Apply Click Apply to save the values and update the screen.

  • Page 98: Figure 101: Management > Lldp > Lldp Port Settings > Lldp Port Configuration

    SE400 SERIES The ensuing table for LLDP Global Config settings are informational only: LLDP Enabled, LLDP PDU Disable Action, Transmission Interval, Holdtime Multiplier, Reinitialization Delay and Transmit Delay. LLDP Port Settings The LLDP Port Settings page allows you to configure the state (enabled or disabled) of the selected port.

  • Page 99: Figure 103: Management > Lldp > Lldp Port Settings > Vlan Name Tlv Vlan Selection

    SE400 SERIES The ensuing table for LLDP Port Status settings are informational only: Port, State and Selected Optional TLVs. Figure 103: Management > LLDP > LLDP Port Settings > VLAN Name TLV VLAN Selection The following table describes the items in the previous figure.

  • Page 100: Snmp

    SE400 SERIES LLDP Overloading To access this page, click Management > LLDP > LLDP Overloading. The ensuing table for LLDP Overloading settings are informational only: Port, Total (Bytes), Left to Send (Bytes), Status and Status (Mandatory TLVs, 802.3 TLVs, Optional TLVs and 802.1 TLVs).

  • Page 101: Figure 106: Management > Snmp > Snmp Community

    SE400 SERIES SNMP Community The SNMP Community page provides configuration options for the community. SNMP v1 and SNMP v2c use the group name (Community Name) certification. It’s role is sim- ilar to the password function. If SNMP v1 and SNMP v2c are used, you can go directly from the configuration settings to this page to configure the SNMP community.

  • Page 102: Figure 107: Management > Snmp > Snmp User Settings

    SE400 SERIES SNMP User Settings The SNMP User Settings page allows you to create SNMP groups. The users have the same level of security and access control permissions as defined by the group settings. To access this page, click Management > SNMP > SNMP User Settings.

  • Page 103: Figure 108: Management > Snmp > Snmp Trap

    SE400 SERIES SNMP Trap The SNMP Trap page allows you to set the IP address of the node and the SNMP credentials corresponding to the version that is included in the trap message. To access this page, click Management > SNMP > SNMP Trap.

  • Page 104: Diagnostics

    SE400 SERIES Diagnostics Through the Diagnostics function configuration of settings for the switch diagnostics is avail- able. Cable Diagnostics The Cable Diagnostics page allows you to select the port for applying a copper test. To access this page, click Diagnostics > Cable Diagnostics.

  • Page 105: Ping Test

    SE400 SERIES Ping Test The Ping Test page allows you to configure the test log page. To access this page, click Diagnostics > Ping Test. Figure 110: Diagnostics > Ping Test The following table describes the items in the previous figure.

  • Page 106: Ipv6 Ping Test

    SE400 SERIES IPv6 Ping Test The IPv6 Ping Test page allows you to configure the Ping Test for IPv6. To access this page, click Diagnostics > IPv6 Ping Test. Figure 111: Diagnostics > IPv6 Ping Test The following table describes the items in the previous figure.

  • Page 107: System Log

    SE400 SERIES Table 93: Diagnostics > IPv6 Ping Test (Continued) Item Description Ping Results Display the ping reply format. PING 2222::777 (2222::777): 56 data bytes --- 2222::777 ping statistics --- 4 packets transmitted, 0 packets received, 100% packet loss PING 2222::717 (2222::717): 56 data bytes 64 bytes from 2222::717: icmp6_seq=0 ttl=128 time=10.0 ms...

  • Page 108: Figure 113: Diagnostics > System Log > Local Logging

    SE400 SERIES Local Logging The Local Logging page allows you to designate a local target when the severity criteria is reached. To access this page, click Diagnostics > System Log > Local Logging. Figure 113: Diagnostics > System Log > Local Logging The following table describes the items in the previous figure.

  • Page 109: Figure 114: Diagnostics > System Log > System Log Server

    SE400 SERIES System Log Server The System Log Server page allows you to configure the log server. To access this page, click Diagnostics > System Log > System Log Server. Figure 114: Diagnostics > System Log > System Log Server The following table describes the items in the previous figure.

  • Page 110: Ddm

    SE400 SERIES The DDM page allows you to set up the diagnostic alarm status. To access this page, click Diagnostics > DDM. Figure 115: Diagnostics > DDM The following table describes the items in the previous figure. Table 97: Diagnostics > DDM...

  • Page 111: Tools

    SE400 SERIES Tools The IXM tool is an industrial Ethernet switch solution to help the users deploy industrial Ether- net switch hardware by allowing users with multiple, managed Ethernet switches in the field to eliminate the need to individually connect to each device to configure it.

  • Page 112: Backup Manager

    SE400 SERIES Backup Manager The Backup Manager page allows you to configure a remote TFTP sever or host file system in order to backup the firmware image or configuration file. To access this page, click Tools > Backup Manager. Figure 118: Tools > Backup Manager The following table describes the items in the previous figure.

  • Page 113: Upgrade Manager

    SE400 SERIES Upgrade Manager The Upgrade Manager page allows you to configure a remote TFTP sever or host file system in order to upload firmware upgrade images or configuration files. To access this page, click Tools > Upgrade Manager. Figure 119: Tools > Upgrade Manager The following table describes the items in the previous figure.

  • Page 114: Dual Image

    SE400 SERIES Dual Image The Dual Image page allows you to set up an active and backup partitions for firmware image redundancy. To access this page, click Tools > Dual Image. Figure 120: Tools > Dual Image The following table describes the items in the previous figure.

  • Page 115: User Account

    SE400 SERIES User Account The User Account page allows you to set up a user and the related parameters. To access this page, click Tools > User Account. Figure 121: Tools > User Account The following table describes the items in the previous figure.
  • Page 116 If you still cannot resolve the problem, contact the local dealer for assistance. If the LED indicators are normal and the connected cables are correct but the packets still cannot be transmitted. Please check the user system's Ethernet devices' configuration or sta- tus. ADVANTECH B+B SMARTWORX TECHNICAL SUPPORT Phone: 1-800-346-3119 (Monday - Friday, 7 a.m.

Table of Contents