Advertisement
OSD MENU FUNCTION
3.2.5 Alarm
MAIN MENU
INFORMATION
[ CAMERA ]
IMAGE
MOTION
RESTART
DEFAULT
EXIT
CAMEAR
LANGUAGE
IR LED
IDLE
MASK
[ ALARM ]
PTZ DISPLAY
BACK
EXIT
ALARM
[INPUT MODE
N/O]
ALARM MODE
OFF
ACTION
OFF
ALARM OUT
OFF
RESET DELAY
30sec
BACK
EXIT
Operation Guide
Camera supports 7 alarm in, 1 alarm
out. Device receive the alarm signal which
could trigger auto function (turn to preset,
run pattern path, etc.), at the same time de-
vice link to alarm output. Alarm function
setting method as follows:
1．Input status
Click up/down to "input status", click
left/right to operate" input status" setting.
Alarm input status could be set N/O and N/
C.
N/O：when channel close, it indicates
device receive valid signal.
N/C：when channel open, it indicates
device receive valid alarm signal.
2．Alarm mode
Click up/down to "alarm mode", click
left/right to operate setting, alarm mode: on/
off
3．Action
Click up/down to "Action", click left/
right to set. It is used to set present alarm
channel, to check if it is linked to operate
some special function, such as preset 2 or
off.
4．Alarm Out
Click up/down to alarm output, click
left/right to set, click up/down to operate
alarm output channel choice, alarm input
could be set on/off.
5．Reset Delay
Click up/down to Reset delay, click
left/right to set, when present channel alarm
occur, if linkage alarm output, alarm output
switch will close, reset delay indicate period
from camera detect the alarm signal to re-
move alarm to regular statue. Time includes
30sec, 1min, 5min, 10min.
Vi-C6201
Advertisement
