Advertisement
Operation Guide
SYSTEM → DEVICE INFORMATION
In Device Information screen, users can set Device Name、Model、Serial
No.、Firmware Version、Encoding Version、Number of Channels、
Number of HDDs、Number of Alarm input and output. See picture 2.2.6-3
System→Time settings
In the Time Settings screen, time sync is operational. "Time Zone" shows
the current IP camera's time zone, and that can be set according to the actual
situations. For "Time Sync", set NTP server address、NTP port、Internal, the
device will be time sync every once in a while according to the setup. For
"Manual Time Sync", set time and check "Sync with computer time", and then
the time of the camera syncs with the local PC. After changing some parameters
and click "save "to save the corresponding settings. See picture 2.2.4
Note：NTP port number is unchangeable
Vi-C6201
Picture 2.2.6-3 device information
Picture 2.2.6-4 Time settings
Advertisement
