Advertisement
Operation Guide
Network →TCP/IP
In "TCP/IP" screen, users can set "IPv4 Address","IPv4 Subnet Mask",
"IPv4 Default Gateway","IPv4 DNS Server""IPv4 mode". By ticking"auto",
the device obtains IP address automatically. After changing some parameters
and click to save the corresponding settings. See picture 2.2.6-6
System→port
"Port" screen includes: "HTTP Port" （the default is 80）、 "RTSP
Port"（the default is 554）、 "HTTPS Port"(the default is 443).Through
network access the device, users can set corresponding port as needed.After
modifying the parameters, click to save the settings. See picture 2.2.6-7
Note： Reboot the IP camera after modifying the parameters.
Network →DDNS
Vi-C6201
Picture 2.2.6-6 TCP/IP interface
Picture 2.2.6-7 port configuration screen
Advertisement
