Advertisement
Event→Video Tampering
Tick "enable video tampering" indicates start IP camera video tampering, see
picture 2.2.6-31
Area Setting: default the whole screen
Sensitivity: 0-100 settable
After related parameter revised, need to click [save] to save related settings.
Event→Exception
"Exception Type" includes "HDD FULL ","HDD Error", "Network Dis-
connected", "IP address conflict"
"Normal Linkage" includes "Notify surveillance Center", "Capture"
"Other Linkage" includes corresponding alarm output channel.
After modifying related parameter, need to click [save] to save settings.
Vi-C6201
Picturer2.2.6-31 Video Tampering
Picture 2.2.6-32 Exception
Advertisement
