Automatic Tv Channel Search (Autoinstall); Monitor Function - Philips VR507 User Manual

AUTO INSTALL
SEARCHING
00 TV CHANNELS FOUND
ƒƒƒƒƒƒƒ__________________
PLEASE WAIT...
Installing your video recording
Automatic TV channel search
(Autoinstall)
During installation, all available TV channels are searched for and saved. If the channel
assignments of your cable or satellite TV provider change or if you are reinstalling the video
recorder, e.g. after moving house, you can start this procedure again. This will replace the TV
channels already saved with the new ones.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press the MENU button on the remote control. The main menu will
appear.
3 Select line 'AUTO INSTALL' using P =r or P ;q .
4
Press OK .
5
'Autoinstall' starts. Wait until all TV channels have been found. This
can take several minutes.
6
When Autoinstall is complete, 'STORED' will briefly appear on the TV
screen.
Date and time have been set and saved.
7
To end, press MENU .
You can read about how to search for a TV channel manually in the section 'Manual TV channel
search'.

Monitor function

You can switch back and forth between the TV picture and video recorder picture with
MONITOR . But this only works when you use a scart cable to connect the video recorder to
your TV set and your TV set responds to this switch-over.
You can also use MONITOR on the video recorder.
17