Table of Contents
Advertisement
3. Installing your video recorder
Preparation for use
This chapter shows you how to prepare the video
recorder for use. The video recorder automatically
seeks out and stores all available TV channels.
'Aim' correctly
In the following sections, you require the remote
control for the first time. When using, always
aim the front of the remote control at the video
recorder and not at the TV.
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
1.Press
1.
P +
.
The automatic channel search starts.
PLEASE WAIT
START
The video recorder does not find any TV
channels during the search
* Select channel 1 on the TV. Can you see the
saved TV channel on the TV?
If not, check the cable connection of the aerial
(aerial socket), video recorder, TV.
* The video recorder searches the entire fre-
quency range in order to find and save the
largest possible number of TV channels.
2.
2.
'TIME' and 'DATE' will appear on the TV
screen.
TIME --:--
DATE --/--/--
SMART CLOCK [ON]
END=EXIT
3.
3.
Check 'TIME'. If required, please change the
time with the number buttons
4.
4.
Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
FINISH
.
0..9
7
5.
5.
When all information is correct, save by
pressing
STATUS/EXIT
The preparation for use is now complete.
Manual TV channel search
In some cases it can occur that all TV channels
are not found and saved during the first installa-
tion. In this case, the missing TV channels must
be searched for and stored manually.
1.
1.
Switch on the TV set. If required, select the
programme number for the video recorder.
2.
2.
Press
.
MENU
The main menu will appear.
3.
3.
Use
to select 'TUNER SET UP'.
K B
L C
Then press
B 1
4.
4.
Use
to select 'MANUAL TUNING'.
K B
L C
Then press
B 1
5.
5.
Select 'PROG.' with
.
B 1
MANUAL TUNING
PROG.
CHANNEL
SKIP
SELECT K L CHOOSE B
END=EXIT
6.
6.
With
or
K B
L C
programme number that you want to use for
the TV channel, e.g. 'P01'. Then press
What is a special channel?
TV channels are transmitted in certain pre-
defined frequency ranges. These ranges are
divided into channels.
A specific frequency/channel is assigned to
each TV station.
Certain frequency ranges are specified as spe-
cial channels (hyperband channels).
7.
7.
Select 'CHANNEL' with
firm with
. Then enter the desired chan-
B 1
nel with
0..9
.
If you set ' SKIP ' on for a channel, this channel
will be ignored when going through the channels
with
P+
or
P–
.
.
.
.
. Then press
K B
L C
P55
055
[OFF]
, select the desired
0..9
, and con-
K B
L C
.
B 1
EN
Hide quick links:
Advertisement
Table of Contents
