Setting The Time And Date - Philips VR507 User Manual

CLOCK
YEAR è 2001
MONTH 01
DATE 01
TIME 20:00
SMART CLOCK ON
________________________________
EXITpMENU STOREpOK
Installing your video recording
a The main menu will appear on the screen
b After you have confirmed the last channel that can be sorted, you will
automatically return to the main menu since no more TV channels can be
assigned.
0
To assign other TV channels to a programme number, repeat steps
7 9
to
A
Confirm the assignment of the TV channel with MENU .
B
To exit the main menu, press MENU .

Setting the time and date

If the display shows an incorrect time or '--:--', the time and date must be reset manually.
If a TV channel which transmits TXT/PDC (teletext/PDC) is stored under programme number
'P01', time/date will automatically be taken from the TXT/PDC information. (SMART CLOCK)
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press MENU on the remote control. The main menu will appear.
3
Select line 'CLOCK' using P =r or P ;q and confirm with OK .
4
Check the year in line 'YEAR'. If required, please change the year with
the number buttons 0-9 on the remote control.
p
5
Select the next line with P ;q or P =r .
6
Check 'MONTH', 'DATE' and 'TIME' in the same way.
a Time/date is displayed incorrectly despite manual setting
b With Smart Clock, time/date is transferred from the TV channel saved on
'P01' and automatically corrected.
Switch off Smart Clock. In line 'SMART CLOCK', select 'OFF' using
QSr
You can switch on 'SMART CLOCK' again when you select 'ON'.
7
Check the displayed settings and confirm with OK .
'STORED' will appear briefly on the screen.
8
To end, press MENU .
.
SqP
or .
19