Child Lock; Switching The On-Screen Display (Osd) Off Or On - Philips VR507 User Manual

42

Child lock

You can prevent unauthorised use of your video recorder with this function. When the child
lock is active, the buttons on the front of the device are blocked (will not function). You can
make programmed recordings while the child lock is on.
1
With the video recorder switched on, press CHILD LOCK on the
remote control for five seconds. ' { ' will appear on the video
recorder display.
2
Put away the remote control somewhere out of reach of children.
3
If you want to switch off the child lock, press CHILD LOCK again for
five seconds, with the video recorder switched on. ' { ' will
disappear from the video recorder display.
a ' {
' will flash in the video recorder display
b This symbol flashes when a button is pressed when the child lock is active.
Switching the on screen display (OSD) off
or on
Along with the on screen menu, the OSD (On Screen Display) also displays information on the
current operating status (counter, playback, recording, TV channel, etc.) on the TV screen. You
can switch off the information about the operating status so that the on screen display (OSD) is
not recorded when copying video cassettes.
1
Switch on the TV set. If required, select the programme number for
the video recorder.
2
Press MENU on the remote control. The main menu will appear.
3 Select line 'SPECIAL SETTINGS' using P =r or P ;q and confirm
with OK .
Other functions