Dst (Daylight Saving Time); Setting The Alarm Time - KUBE SYSTEMS KS Clock User Manual

DST (Daylight Saving Time)

To enable daylight saving time, press
u
the DST +1 button; the time will
increase by one hour.
TIME
HOUR
SET

Setting the Alarm Time

Press and release the Alarm SET
u
button on the top of the unit; the Alarm
icon will flash in the display.
Within 3 seconds, press the MIN
w
button to set the minutes. When done,
wait a few seconds and the Alarm icon
will stop flashing.
OPERATION
DST
DST
+1
MIN -1
To cancel daylight saving time, press
v
the DST –1 button; the time will
decrease by one hour.
TIME
SET
Within 3 seconds, press the HOUR
v
button to set the alarm hour, making
sure to set the correct AM/PM.
To activate the alarm, press the Alarm
x
ON/OFF button once; the unit will beep
and the Alarm icon will appear in the
display.
— 12 —
DST
DST
HOUR +1
MIN -1