Setting The Time - KUBE SYSTEMS Audio Clock II User Manual

Setting the Time

To set the time, turn the unit
upside down. Press and release
the TIME SET button on the
bottom of the unit; the time will
flash in the display.
TIME
HOUR
SET
Within 3 seconds, press the MIN
button to set the minutes. When
done, wait a few seconds and
the clock will stop flashing.
Note: if the IR app has been used
to program the unit, the bottom buttons
will be disabled. To enable the bottom
buttons press and hold SET and MIN
together for 5 seconds. The display
will indicate Lb.on (Lower buttons ON).
OPERATION
DST (SEL) DST
MIN +1 -1
_
Within 3 seconds, press the
HOUR button to set the hour,
making sure to set the correct
AM/PM.
TIME
SET
TIME
SET
_
7
DST (SEL) DST
HOUR
MIN +1 -1
DST
(SEL) DST
HOUR
+1 -1
MIN