Specifications; Troubleshooting - KUBE SYSTEMS KS Clock User Manual

Specifications

Power Requirements .............................................................................................. 12VDC, 5A
Operating Temperature .........................................................................................15° to 95° F
Weight ...............................................................................................................1.1 lbs (0.5 kg)
Dimensions (L x W x H) .................................... 4.13 x 4.13 x 2.28 inches (105 x 105 x 58 mm)
If you have any trouble with your system, try these simple steps which should handle most
common issues.
SYMPTOM:
Cannot change time display; pressing the TIME SET buttons does not do
anything.
SOLUTION(s):
The unit has been locked out from manually changing the time. To change the
time, the unit has to be unlocked or the desired time needs to be set by the KS
Programmer. See Setting the Time section.
SYMPTOM:
The Alarm worked fine this morning but when attempting to activate it for
tomorrow morning, the unit beeps twice and indicates "Set Alarm".
SOLUTION(s):
The alarm of KS Clock is a one-day alarm. This means a user will always have
to manually set the alarm time for each use.
SYMPTOM:
KS Clock will not pair with a Bluetooth device.
SOLUTION(s):
Enter Bluetooth list (in Setting's menu of Bluetooth device) and delete any entry
named "KS CLOCK". On Apple devices, this function may be executed by
selecting "Forget this device". After erased, attempt to pair again; see Setting
the Time section.
SYMPTOM:
Pairing with a Bluetooth device was performed earlier and the device was left
connected for several hours. Will pairing be needed again?
SOLUTION(s):
Check Bluetooth status on the device to find out. If the device indicates no
Bluetooth device, then pairing will need to be performed.
Check the Bluetooth icon display on the Clock. If the device is still connected
to KS Clock, the Bluetooth icon will be lit.
KS Clock will not actively disconnect any connected Bluetooth device. Most
devices do the same. Devices can remain connected constantly unless
manually disconnected or after a Power outage.
SPECIFICATIONS

TROUBLESHOOTING

— 17 —