MD SPORTS 44123-15 Assembly Instructions Manual page 9

X 4
9
X 4
10
X 2
11
A1
X 42
A1
FIG.3
9. Place Plastic Corners (#9) flush with table corners using three Screws (#A1) per Corner. See FIG. 3A
10. Place End Panels (#11) between the corners and flush with the table edge at the Player end of table using
five Screws (#A1) per End Panel. See FIG. 3.
11. Place Side Panels (#10) flush with table edge at the side of the table using five Screws (#A1) per Side
Panel. See FIG. 3.
12. Repeat above steps for other Table Surface.
NOTE: Make sure the all Panels are inside the Plastic Corners.
44123-15
FIG. 3
10
Center
(Continued on the next page.)
FIG. 3A
9
11
A1
7
A1
Player
10
www.themdsports.com