User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
4) Click
Figure 5. 19 Motion Detection Handling for DS-9100/8100HFI-ST(HWI-ST) & DS-9100HFI-RT/XT
Figure 5. 20 Motion Detection Handling for DS-9000HFI-ST/RT/XT (HWI-ST) & 8000HFI-ST
Note:
IP Camera is supported by DS-9000HFI-ST/RT/XT (HWI-ST) & 8000HFI-ST series only.
5) Select the channels which you want the motion detection event to trigger recording or capture.
6) Click
7) Click
8) Click
interface.
3.
Enter Record/Capture Schedule settings interface (Menu> Record> Schedule>Record/Capture Schedule).
For detailed information about record schedule settings, refer to step 2 in Chapter 5.2 Configuring
Record/Capture Schedule.
Note:
You need to select the Type as Motion in record schedule settings.
Figure 5. 18 Motion Detection- Mask
to set the handling method in the pop-up message box.
to save the settings.
to back to the upper level menu.
in the Motion Detection interface to save the settings. Exit the Motion Detection
67