Table of Contents
Advertisement
User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
11.8 Checking S.M.A.R.T. Information
Purpose:
The S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitoring system for HDD to detect
and report on various indicators of reliability in the hopes of anticipating failures.
Note:
This chapter is only available for DS-9100/9000HFI-ST/XT & 8100/8000HFI-ST series.
Steps:
1. Enter the S.M.A.R.T. Settings interface.
Menu > Maintenance > HDD Detect >S.M.A.R.T. Settings
2. Select a HDD to view its S.M.A.R.T. information list.
Note:
If you want to use the HDD even when the S.M.A.R.T. checking is failed, you can check the checkbox
before the Continue to use this disk when self-evaluation is failed item.
3. Three self-tests of S.M.A.R.T are provided, including Short Test, Expanded Test and Conveyance Test. You
can select a self-test type and click
to start self-test.
Figure 11. 26 S.M.A.R.T. Settings Interface
197
Advertisement
Table of Contents
