Setting Ptz Presets, Patrols & Patterns; Customizing Presets - Hyundai DS-9100 HFI-ST Series User Manual

User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
4.2 Setting PTZ Presets, Patrols & Patterns
Before you start:
Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.
Note: We use the interface of DS-9100HFI-ST series (unless stated) as example to describe the following settings.

4.2.1 Customizing Presets

Purpose:
Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes place.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Use the directional button to move the camera to the location where you want to set preset.
3. Check
4. Click the preset number to save the preset.
Repeat the steps2-4 to save more presets. If the number of the presets you want to save is more than 17, you can
click and choose the available numbers.
Figure 4. 2 PTZ- More Settings
.
Figure 4. 3 More Presets
50