Table of Contents
Advertisement
User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
2. Choose Camera in the list on the menu.
3. Double-click the preset you want to call in the Preset list.
4.2.3 Customizing Patrols
Purpose:
Patrols can be set to move the PTZ to different key points and have it stay there for a set duration before moving
on to the next key point. The key points are corresponding to the presets. The presets can be set following the steps
above in Chapter 4.2.1 Customizing Presets.
Steps:
1. Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings
2. Select patrol number.
3. Click
under Patrol option box to add key points for the patrol.
4. Configure key point parameters, such as the preset No., duration of staying for one key point and speed of
patrol. The key point is corresponding to the preset. The Preset determines the order at which the PTZ will
follow while cycling through the patrol. The Duration refers to the time span to stay at the corresponding
key point. The Speed defines the speed at which the PTZ will move from one key point to the next.
5. Click
to save the key point to the patrol.
Repeat the above steps to add more key points.
You can also click
to delete the corresponding key point and click
Figure 4. 6 PTZ- Add Key Point
Figure 4. 7 Key point Configuration
52
to delete all the key points.
Advertisement
Table of Contents
