Table of Contents
Advertisement
User Manual of DS-91/90HFI-ST/RT/XT & DS-81/80HFI-ST & 91/90/81HWI-ST Series DVR
2.2 Adding and Connecting the IP Cameras
Note:
This Chapter is available for DS-9000/8000HFI-ST & DS-9000HFI-RT/XT & 9000HWI-ST series only.
2.2.1 Adding the IP Cameras
Purpose:
Hybrid DVR (DS-9000/8000HFI-ST & DS-9000HFI-RT/XT & 9000HWI-ST series) can connect the network
cameras and record the video got from it. So before you can get a live view or record of the video, you should add
the network cameras to the connection list of the device.
Before you start:
Ensure the network connection is valid and correct. For detailed checking and configuring of the network, please
see Chapter 9.1 Configuring General Settings, Chapter 9.3 Checking Network Traffic and Chapter 9.4 Network
Detection.
Steps:
1.
Enter the Camera Management interface.
Menu> Camera> Camera
Note:
In Analog Camera Management interface, the status of analog cameras display. Disabling the analog
camera can be realized by clearing the checkbox before the analog camera No.. One more network camera
can be added by disabling one analog camera. 16 /8 /4 network cameras can be added to DS-9016&8016
HFI-ST&9016HFI-RT&9016HFI-XT&9016HWI-ST/9008&8008
HFI-ST&9008HFI-RT&9008HWI-ST/9004&8004HFI-ST&DS-9004HFI-RT&9004HWI-ST series at most
when all the analog cameras are enabled. 32 /16 /8 network cameras can be added to DS-9016&8016
HFI-ST&9016HFI-RT&9016HFI-XT&9016HWI-ST/9008&8008
HFI-ST&9008HFI-RT&9008HWI-ST/9004&8004HFI-ST&DS-9004HFI-RT&9004HWI-ST series at most
when all the analog cameras are disabled.
Figure 2. 12 Main Menu
31
Advertisement
Table of Contents
