Advertisement
384i/704i
384i Only:
To enter the site modem INIT string into the 384i Remote
Maintenance program:
1. Make sure your modem is properly connected to your computer and
functioning correctly.
2. Start the Remote Maintenance program and enter your programming
password (when requested).
3. From the Main Menu, select Option and press Enter.
Select RS232 Port and press Enter.
4.
5. Set the RS232 options for: 9600 (speed), 8 (length), none (Parity), 1
(Stop Bit), Off (echo) and COM Port (1 or 2), then press Enter twice
and press ESC.
To send and store the INIT string in the site modem:
1. From the Main Menu, select Communication and press Enter.
Select Modem Control and press Enter.
2.
Type AT&F to default the modem.
3.
4. Enter the following initialization string (spaces only shown for clarity):
AT Q1 &C1 &D0 &S1 S0=1 E0 &W0 &W1 and press Enter.
For earlier CNet modems (P/N 85862, 85862A, 85862B, 85862C) use:
AT Q1 Y1 &C1 &D0 &S1 S0=1 E0 &W0 &W1 and press Enter.
5. To view all the modem settings and check the INIT string, type
AT&V and press Enter.
displays. Review the displayed Active Profile, Stored Profile 0 or
Stored Profile 1 data to be sure your entries were correct. (Not all
types of modems are compatible with all these commands and will
disregard the entries for some items.)
704i Only:
To enter the site modem INIT string using Windows
HyperTerminal program:
1. Make sure your modem is properly connected to your computer and
functioning correctly.
2. Start the HyperTerminal program. (Click START - PROGRAMS -
ACCESSORIES - HYPERTERMINAL. Double-click on the
HYPERTRM.EXE file.)
3. Create a name for the new connection, such as MODEM SETUP and
click OK.
Remote Modem Installation Instructions
Your modem can only connect to COM1 or COM2.
You will advance to the Modem Initialize Command window.
OK will display on the screen.
The INIT string you sent in step 4 is contained in the data that
Your modem can connect to COM1, COM2, COM3 or COM4.
15
Advertisement
