Clock (Vcr) - Philips H982NUD User Manual

H982NUD_EN1 3/2/06 6:56 PM Page 22

22 Clock (VCR)

Follow these steps to set the VCR clock. Make sure:
1
Press VCR, then press DISC/VCR MENU so MENU
appears. If the clock has never been set, the CLOCK SET
menu may appear when you press DISC/VCR MENU. If so,
follow the instructions from step 3 on this page.
2
Press K or L to select CLOCK SET.Then, press B.
3
While the MONTH space is flashing, press K or L
until the month appears.Then, press B.
CLOCK SET
MONTH DAY
0 3 / – –
HOUR MINUT
– – : – –
4
While the DAY space is flashing, press K or L until
the day appears.Then, press B.
CLOCK SET
MONTH DAY
0 3 / 2 0
HOUR MINUTE
– – : – –
5
While the YEAR space is flashing, press K or L
until the year appears.Then, press B. The day of
the week will appear automatically.
CLOCK SET
MONTH DAY
0 3 / 2 0 MON
HOUR MINUTE
– – : – –
6
While the HOUR space is flashing, press K or L
until the hour appears.Then, press B.
7
While the MINUTE space is flashing, press K or L
until the minute appears.Then, press B.
8
While the AM or PM space is flashing, press K or L
to point to AM or PM.
Your selection will flash on the screen in the AM/PM space.
9
Press CLEAR/RESET or B to start the clock.
YEAR
– – – –
EAM/PM
– –
YEAR
– – – –
AM/PM
– –
YEAR
2 0 0 6
AM/PM
– –
STANDBY-ON
SEARCH MODE DISPLAY
REPEAT REPEAT AUDIO
A-B
SUBTITLE ZOOM ANGLE
RETURN TITLE CLEAR/RESET SLOW
1
VCR VCR/TV
DISC/VCR
MENU
2-9
OK
STOP PLAY
TIMER SET MARKER
SPEED
1 2
4 5 6
8 9 0
Helpful Hints
• If the clock has never been set,
the CLOCK SET menu may
appear when you press
DISC/VCR MENU. If so, follow
the instructions from step 3
above.
• Press DISPLAY until the time
appears on the TV screen.
• Power failures of more than 30
seconds can erase the clock
setting.
• To reset the clock, follow steps
1-2. Select the information you
want to change using s or B.
When the information is
flashing, use K or L to enter
the correct information. Press
CLEAR/RESET to set the clock.
SKIP / CH
9
DVD
SYSTEM
MENU
PAUSE
RECORD
3
7
+10