Philips H982NUD User Manual page 9

Digital video disc player & video cassette recorder
Table of Contents

Advertisement

H982NUD_EN1 3/2/06 6:56 PM Page 9
Simplest connection using only the supplied black RF coaxial cable
This connection will let you use the features of both the VCR and the DVD player.
AUDIO OUT
1
Disconnect the antenna or Cable TV signal from your TV and
connect it to the ANT -IN (Antenna In) jack of your DVD/VCR.
2
Connect the supplied black RF coaxial cable to the ANT -OUT
(Antenna Out) jack on the back of the DVD/VCR and to the
ANTENNA IN jack on the TV. The ANTENNA IN jack on the TV may be
labelled TV IN, RF IN, 75Ω (ohm) or ANT-IN. See your TV owner's manual for
assistance.
3
Plug in the power cord of your TV.Turn on the TV and set it to
channel 3 or 4.
4
Plug in the power cord of the DVD/VCR.You are ready to turn on
the DVD/VCR. Go to page 16 before turning it on.
The DVD/VCR's output channel is 3 when you purchase it. So, set your TV to
channel 3 when the DVD/VCR is new.
If you cannot use channel 3 at your TV, you can change the DVD/VCR's output
channel to channel 4.To do so, press VCR to put the DVD/VCR in VCR mode.
VCR light will be on the front of the DVD/VCR. Insert a videotape and press
PLAY B to start playback. During playback, press and hold (VCR)
PLAY B on the front of the DVD/VCR for 3-5 seconds. Each time you
do this, the DVD/VCR's output channel switches between 3 and 4, and the
selected channel number appears on the display panel. Change your TV to
channel 3 or 4 accordingly. (You cannot change the DVD/VCR's output channel
while adjusting tracking manually. Press STOP C to stop playback and cancel
manual tracking, then press PLAY B to resume playing and change the output
channel.)
There is not a channel 3/4 switch on the DVD/VCR (as customary with most
VCRs).
DVD/VCR to TV only
DVD
DVD/VCR
VCR
DIGITAL
AUDIO
S-VIDEO
COMPONENT
AUDIO OUT
AUDIO IN
VIDEO OUT
OUT
OUT
ANT - IN
Y
L
L
L
C
B
/
R
R
P
B
COAXIAL
R
VIDEO OUT
VIDEO IN
ANT-OUT
C
R
/
P
R
1
ANT - IN
ANT-OUT
Hookups (cont'd) 9
Antenna or
Cable TV
signal
7 5
A N T
/
C A B
L E
2
Black RF coaxial
cable (supplied)
Antenna In Jack
(on back of TV)
example only

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvp3150v/37bDvp3150v/37Dvp3150v

Table of Contents