Clock (Vcr) 19 - Philips DVP3345V/F7 User Manual

E8E21UD_EN1.qxd 09.1.23
Follow these steps to set the VCR clock. Make sure:
1
Press VCR, then press SETUP so MENU appears. If the
clock has never been set, the CLOCK SET Menu may
appear when you press SETUP. If so, follow the instructions
from step 3 on this page.
- M E N U -
BTIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT
CLOCK SET
LANGUAGE SELECT
2
Press K or L to select CLOCK SET. Then, press B.
3
While the MONTH space is flashing, press K or L
until the month appears. Then, press B.
CLOCK SET
MONTH DAY
0 3 / – –
HOUR MINUTE
– – : – –
4
While the DAY space is flashing, press K or L until
the day appears. Then, press B.
5
While the YEAR space is flashing, press K or L
until the year appears. Then, press B. The day of
the week will appear automatically.
6
While the HOUR space is flashing, press K or L
until the hour appears. Then, press B.
7
While the MINUTE space is flashing, press K or L
until the minute appears. Then, press B.
8
While the AM or PM space is flashing, press K or L
to point to AM or PM.
Your selection will flash on the screen in the AM/PM space.
9
Press CLEAR or B to start the clock.
2:42 PM Page 19
[OFF]
YEAR
– – – –
AM/PM
– –

Clock (VCR) 19

1 2 3
4 5 6
7 8 9
CLEAR
1
+10 0
VCR SETUP
INPUT
2-9
OK
REW PLAY
STOP PAUSE
DISPLAY SUBTITLE ZOOM
ANGLE SEARCH REPEAT
REC SPEED MODE
Helpful Hints
• If the clock has never been set,
the CLOCK SET Menu may
appear when you press SETUP.
If so, follow the instructions
from step 3 above.
• Press DISPLAY repeatedly to
show the time on the TV
screen.
• Power failures of more than 30
seconds can erase the Clock
Setting.
• To reset the clock, follow steps
1-2. Select the information you
want to change using s or B.
When the information is
flashing, use K or L to enter
the correct information. Press
CLEAR to set the clock.
OPEN/CLOSE
TRACKING
TITLE
9
DVD
DISC
MENU
FFW
BACK
AUDIO
REPEAT
A-B
TIMER SET