Wireless Settings - Gemtek Systems WL-299 series User Manual

4.2 Wireless Settings

The settings of the wireless device are displayed here, and you can edit some of
these settings.
Operating Mode: Infrastructure - is the default setting. Switch to Ad-Hoc mode
when communicating to another client device without the
presence of the Access Point.
SSID:
The SSID is also known as Service Set ID. This is the name of your wireless
Only Wireless Ethernet Adapters and clients that share the same
network.
SSID are able to communicate with each other.
Channel: This is the channel that the Wireless Ethernet Adapter uses to transmit
and receive information. The channel that you select here is restricted
to the channels that can be used within your Regulatory domain.
9