Administration - Gemtek Systems WL-299 series User Manual

4.5 Administration

Change Username and Password: You can use a password to prevent tampering with
the configuration of the Wireless Ethernet Adapter. By default, no username and password
is required. However, if you choose to use a password, type in a password that is no more
than 15 letters in length. Re-enter the password in the next field, and
click Change Password for the change to take effect.
Reboot Bridge: Click Reboot to restart the Wireless Ethernet Adapter.
Reset to Factory Defaults: Click on Factory Reset to return all settings to
the Factory Default values. (Press and release the Reset button on the back
of the unit to return the Wireless Ethernet Adapter to its factory default settings.)
14