Security - Gemtek Systems WL-299 series User Manual

4.6 Security

WEP Enabled: The default setting is Disable.
of security on your wireless network which can be achieved by using
WEP (Wired Equivalent Privacy) encryption. When an encrypted
frame is received it will only be accepted if it decrypts correctly. This
happens only if the receiver has the WEP Key used by the
transmitter.
Adapter, must share the same WEP selection – either Enable or Disable
To enable WEP Encryption, click on WEP Enable.
Encryption (WEP)—additional measure
All devices on the network, and the Wireless Ethernet
15