Assembly - NordicTrack NTEX29017.0 User Manual

ASSEMBLY

• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you complete all assembly steps.
• To identify small parts, see page 8.
• To avoid damaging parts, do not use power tools.
1. Go to my.nordictrack.com on your computer
and register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Care
• allows us to notify you of upgrades and offers
Note: If you do not have internet access, call
Customer Care (see the front cover of this
manual) and register your product.
2. Attach the Rear Stabilizer (4) to the Base (2) with
two M10 x 60mm Bolts (115), two M10 Washers
(112), and two M10 Locknuts (116).
• In addition to the included tool(s), assembly
requires the following tool(s):
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
115
4
112
116
9
2