Dab Settings; Prune Invalid - PURE Evoke F3 Owner's Manual

DAB settings

Note: You can only see the DAB settings when you have selected 'DAB' as the radio source.
Changing the digital radio station order
To change the order that Evoke displays digital radio stations in:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Station
Order'.
3. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
between one of the following options:
Alphanumeric: Choose this option to display digital radio stations in alphanumerical order.
Ensemble: Choose this option to list stations in groups according to their multiplex. Multiplexes or
ensembles are groups of stations owned and broadcast by a single operator.
Valid: Choose this option to only display active radio stations.
Scan
You can use the scan (autotune) function to automatically scan for new digital radio stations and remove
inactive ones.
To carry out an autotune:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Scan'.
The number of stations found will be displayed during the autotune.
When the autotune has finished, Evoke will tune to the last station that you were listening to. If the last station
you were listening to is no longer available, Evoke will tune into the first station in the alphabetical list.
Manual tuning
To manually tune Evoke to a digital radio station that broadcasts on DAB Band III:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose
'Manual tune'.
3. Turn and press the Select dial or use the <Select> buttons on the remote control to choose the
channel that the radio station is broadcasting on.
4. Press the Menu button to return to the main menu.

Prune invalid

To remove inactive stations from the station list:
1. Press the Menu button.
2. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Prune
invalid'.
3. Turn and press the Select dial or use the <Select> buttons on the remote control to choose 'Yes'.
Evoke will remove all inactive stations from the station list.
24