Outdoor Temperature/Humidity Flashes; Power The Color Forecast Station; Ac Power Adapter; Batteries - La Crosse Technology TX141TH-B Manual

Dew Point Temperature
Dew Point Temperature is the saturation point of the air, or the temperature to which the air has to cool in
order to create condensation. The higher the dew points, the higher the moisture content of the air at a
given temperature.
View Dew Point Temperature: From a normal display, press the HEAT/DEW button twice and Dew
Point will show instead of the outdoor ambient temperature. The words Dew Point will show near outdoor
temperatures.
Note: Dew Point is lower than the actual temperature.
Outdoor Temperature/Humidity Flashing
1. Low battery icon
Change batteries in the transmitter and press the TX button.
Hold the SENSOR SEARCH button for three seconds and the forecast station will search for the
outdoor transmitter again.
2. End of Transmission Range:
Move the transmitter closer to the forecast station.
Avoid obstructions in the signal path.
Keep transmitter and forecast station away from electronics.
Power the Forecast Station

AC Power Adapter

Insert enclosed 5-volt AC power adapter into a wall outlet, then into the forecast station.
Battery
Compartment
3 "AAA"

Batteries:

1. Remove battery cover. Slide tab down and pull off to remove battery cover.
2. Install three new AAA batteries according to the polarity markings.
Do Not Mix Old and New Batteries
Do Not Mix Alkaline, Lithium, Standard or Rechargeable Batteries
Model: T83653
present in the outdoor temperature area:
www.lacrossetechnology.com/support
AC Power Jack
BACK
VIEW
Battery Cover
Page | 9