Advertisement
Quick Links
Advertisement
Related Manuals for Z-Wave ZEM-1
Summary of Contents for Z-Wave ZEM-1
- Page 1 ZEM-1 Gateway Hub USER MANUAL...
-
Page 2: Feature List
Feature List Z-Wave plus Gateway Hub is universal controller to control Home control Group of notification sensor(Door/Window), On/Off Switch ,Valve Open/Closed, and Door Lock - Keypad remotely. Certification KC : Korean Certification Z-Wave Plus Z-Wave Device type : Central Controller... - Page 3 Association Group Information CRC16 Device Reset Locally Manufacturer Specific Power Level Security Version Z-Wave Plus Info Controlled Association Association Group Information Basic CRC16 Multi Channel Multi Cannel Association ...
- Page 4 Glossary Device or Node Devices and nodes are all terms to describe an individual Z-Wave device. These are all interchangeable when setting up your Z-Wave network Inclusion Add a Z-Wave device to the network Exclusion Delete a Z-Wave device from the network...
- Page 5 A. How to use Android UI? 1. Operate the Controller APK 2. Relevant UI page (below picture is example when Switch/Sensor/Valve/Door Lock devices are included)
- Page 6 3. To do inclusion -. Click “Setting” on UI page at #2 procedure -. Click ‘inclusion’ button and click ‘Yes’ to run inclusion mode 4. To do exclusion -. Click “Setting” on UI page at #2 procedure -. Click ‘exclusion’ button and click ‘Yes’ to run exclusion mode 5.
- Page 7 -. Click ‘LearnMode’ button and click ‘Yes’ 6. To do Factory Reset Factory Reset method & Description of the situation to use the reset function. "If this controller is the primary controller for your network, resetting it will result in the nodes in your network being orphaned and it will be necessary after the reset to exclude and re-include all of the nodes in the network.
- Page 8 B. How to connect WIFI? 1. Connect keyboard to usb port. 2. Control + C with keyboard 3. You must edit as below, if the name of the WiFi network is “JIN_TEST”. And password is 1234567890.
- Page 9 Open the wpa-supplicant configuration file in nano: pi@raspberrypi:~$ sudo nano /etc/wpa_supplicant/wpa_supplicant.conf Go to the bottom of the file and add the following: Network={ Ssid=”JIN_TEST” Psk=”1234567890” Key=WPA-PSK 4. Now save the file, Ctrl+O, Enter and Ctrl+X. 5. And sudo reboot or Power off/on. The Association Groups available Info - Group ID : 1...
- Page 10 - Maximum Nodes : 5 - Description : Z-Wave Plus Lifeline Product Specifications Product Type IoT Controller(Hub) RF frequency 29.3kHz (f =920.9 / 921.7 / 923.1MHz) RF operating Up to 100m outdoor line of sight, in distance unobstructed environment HW Composition...