Hyundai HB 962 Instruction Manual page 22

HOW TO USE THE HAND BLENDER
The hand blender is perfectly suited for preparing dips, sauces, soups, mayonnaise and baby food
as well as for mixing and milkshakes.
1) The steps to install the blender stick are described in " Accessory Installation".
2) Introduce the hand blender in the measuring bowl. Then press the control switch level I or the
switch level II (turbo).
3) You can use the hand blender in the measuring bowl and just as well in any other vessel.
When blending directly in the saucepan while cooking take hand blender from overheating.
4) Turn the blender stick off the motor unit after use.
HOW TO USE YOUR CHOPPER
Chopper is perfectly for hard food, such as chopping meat, cheese, onions, herbs, garlic, carrots,
walnuts, almonds, prunes etc.
Don't chop extremely hard food, such as nutmeg, coffee beans and grains.
1) Caution: the blade is very sharp! Always hold it by the upper plastic part.
2) Place the blade P7 on the centre pin of the chopper bowl P8. Always place the chopper bowl
on the anti-slip base.
3) Place the food in the chopper bowl.
4) Place the blade gear box adapter P6 on the chopper bowl.
5) Turn the motor unit on the chopping bowl lid until it locks.
6) Press switch 1 or 2 to operate the chopper. During processing, hold the motor unit with one
hand and the chopper bowl/jug the other.
7) After use, turn the motor unit off the blade gear box adapter.
8) Then remove the gear box adapter from the chopper bowl.
9) Carefully take out the blade.
10) Remove the processed food from the chopper bowl.
Fig.1
ENG - 22
Fig.2