Telescopic Aerial; Tuning To An Fm Station; Changing The Scan Setting - Bush WO280 Instruction Manual

Using your Compact Digital Radio
Let's get started

Telescopic aerial

Please make sure that the aerial is fully extended before you attempt to tune to an FM
station. This will ensure that the maximum signal strength is available when the radio
begins to scan. Extending the aerial also ensures the best possible sound quality.

Tuning to an FM station

Press and release the Scan button to scan up the frequency band. Press and hold the
Scan button to scan down the frequency band. Use the Prev and Next buttons to fine tune
each frequency in 0.05MHz steps.
Note: If reception is still poor adjust the position of the aerial or try moving the radio to
another location.

Changing the Scan setting

In FM mode:
1. Press and hold the Menu button until 'FM <Scan setting>' is displayed. Press the rotary
Volume control to select. The current Scan setting will have an '*' in the top right of
the display.
There are two different options to choose from:
• Strong stations
The scan will only stop when a strong signal strength is received which should also
result in a better audio quality. It is possible that the station you are scanning for may
be missed using this option.
• All stations
The scan will stop for every station it receives, even if the signal strength is poor.
2. Use the Prev or Next button to choose from the two options available and Press and
release the rotary Volume control to Select. Press and release the Menu button to
return to the station display.
section of these instructions, or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 600 3021.
Using your Compact Digital Radio
25