Setup (Mac Environment) - Kingston Technology DataTraveler Locker+ G3 Installation Manual

Setup (Mac Environment)

Insert the DTL+ G3 into an available USB port on your notebook or
desktop and wait for the Mac operating system to detect it. When it
does, you will see a DTLplus volume appear on the desktop, as seen in
.
Figure 6.1
1. Double-click the DTL+ G3 DVD icon.
2.
Double-click the Mac folder found in the window displayed in
Figure 6.2.
3. Double-click the DTLplus application icon found in the window
displayed in Figure 6.3. This will start the initialization process.
Figure 6.2 – DTL+ G3 Contents
Document No. 480G3001-001.A04
®
DataTraveler Locker+ G3 USB-to-Cloud
Figure 6.1 – DTLplus
Figure 6.3 – DTL+ G3 Application
Page 14 of 24