Table of Contents
Advertisement
ITC Series
One Sensor (DI)
The camera provides one digital input (sensor).
Sensor (DI) can be connected to either a voltage type sensor or a relay type sensor as the
following figures. Settings can be done through the camera's webpage.
- Input voltage range: 0VDC minimum to 5VDC maximum, Max 50mA
Relay Rating: Max 30VDC 1A
Do not exceed the maximum input voltage or relay rate.
Internal
Relay Type
SW2
SW3
② Audio Connection
The camera provides a mono audio input and output. Due to low audio output power, an
N / A
N / A
amplified speaker is recommended for enhanced sound (Refrain from connecting a
SW5
SW6
headphone or an earphone directly to the camera).
N / A
N / A
- Microphone In: Max 2Vp-p, 20K Ω (90dB)
- Headphone Out: 60mW, 16 Ω (95dB)
DI
VIDEO
DO
1
Out
C
C
Amp Speaker
14
CBC AMERICAS CORP. - EAST COAST +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600 | MEXICO +52 (55) 5280-4660
Reset
+3.3V
Output of
Sensor
DI
-
+
COM
AUDIO
1
In
Out
ITC6500 Series Installation Guide
Internal
Voltage Type
ETHERNET
Mic
Output of
Sensor
DI
+
-
COM
+
-
MICRO SD
ganzsecurity.com. 01/17
DC12V
+
Advertisement
Table of Contents
