Connecting Cable(S); Installing Base Mount - Ganz ZNT1-H Series Installation Manual

ITC Series ITC6500 Series Installation Guide

4.2. Connecting Cable(s)

Connect the required cables to the corresponding connectors on the back panel of the camera
body. Refer to 5. CONNECTIONS for more information about each connector.

4.3. Installing Base Mount

[Base Mount Installation: Upside-Down View]
1) Insert the provided 8 tamper resistant screws to the corresponding screw holes on the base
mount by referring to the image above.
2) Tighten them with a Phillips head #2 screwdriver to fix the base mount to the camera.
10 CBC AMERICAS CORP. - EAST COAST +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600 | MEXICO +52 (55) 5280-4660
ganzsecurity.com. 01/17