ITC Series ITC6500 Series Installation Guide Precaution • Please read this manual carefully before installing the unit. • Never disassemble the camera. Unauthorized disassembly may cause equipment failure or damage to the unit. • Please do not install the camera in a place exposed to direct sunlight. •...
ITC Series ITC6500 Series Installation Guide Quick Installation Guide 2. PACKAGE CONTENTS CABEL CORE Please unpack the package carefully and handle the equipment with care. The package contains: Camera Sunshield DC Power Jack Cable (Below is the sunshield attached image) Screw &...
ITC Series ITC6500 Series Installation Guide 3. PART NAMES Sunshield Analogue Video Output RJ45 Socket NTSC / PAL Button Reset Button Terminal Connectors Terminal for DI/DO Connectors Terminal Connectors for power adaptor for Audio In/Out ...
Page 8
ITC Series ITC6500 Series Installation Guide ⑨ Terminal Connector for Power Adaptor Connect terminal blocks for power supply Refer to 5.CONNECTIONS for more information. CBC AMERICAS CORP. - EAST COAST +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600 | MEXICO +52 (55) 5280-4660 ganzsecurity.com.
ITC Series ITC6500 Series Installation Guide 4. INSTALLATION 4.1. Installing Cable Gland Gland body Electrical nut Hole for gland O-ring Sealing nut 1) Detach the back cover by twisting it counter-clockwise. 2) Disassemble the provided cable gland unit. There will be an electrical nut, a rubber sealing ring inserted inside the cable gland, a gland body, and a sealing nut.
ITC Series ITC6500 Series Installation Guide 4.2. Connecting Cable(s) Connect the required cables to the corresponding connectors on the back panel of the camera body. Refer to 5. CONNECTIONS for more information about each connector. 4.3. Installing Base Mount [Base Mount Installation: Upside-Down View] 1) Insert the provided 8 tamper resistant screws to the corresponding screw holes on the base mount by referring to the image above.
ITC Series ITC6500 Series Installation Guide 4.4. Closing the Back Cover 1) Insert the provided silica gel packet inside the back panel. 2) Close the back panel of the camera by twisting the back cover clockwise on the camera’s back panel.
ITC Series ITC6500 Series Installation Guide 4.7. Installing with Bracket The compatible accessories to mount this camera are as follows. Model Names & Combinations • WB-1W – Wall Mount Bracket • JB-1W – Ceiling Mount Bracket • PMA2 – Pole Mount Adaptor WB-1W + PMA2 •...
ITC Series ITC6500 Series Installation Guide 5. CONNECTIONS ANALOGUE RJ45 VIDEO OUT DIDO AUDIO RS-485 POWER DIDO AUDIO IN AUDIO OUT AUDIO OUT GND POWER RS-485 [ Back Panel of Camera] ① DIDO (Sensor/Alarm) Connection Two Alarms (DO1 | DO2) The camera provides two digital outputs (alarms).
Page 14
Reset ITC Series ITC6500 Series Installation Guide One Sensor (DI) The camera provides one digital input (sensor). Sensor (DI) can be connected to either a voltage type sensor or a relay type sensor as the following figures. Settings can be done through the camera’s webpage. - Input voltage range: 0VDC minimum to 5VDC maximum, Max 50mA Relay Rating: Max 30VDC 1A Do not exceed the maximum input voltage or relay rate.
Page 15
ITC Series ITC6500 Series Installation Guide ③ RS-485 Connection The RS-485 serial port consists of TRX+(RX+) and TRX-(RX-) like the following image. 485 Device ④ Power Connection The camera can be powered by either 12VDC, 24VAC, or PoE. If the camera is powered via PoE, you do not need to connect the power adaptor.
ITC Series ITC6500 Series Installation Guide 6. CONFIGURATION 6.1. Set up network environment The default IP address of the device is 192.168.XXX.XXX. Users can identify the IP address of the device from converting the MAC address’s hexadecimal numbers, which is attached to the device. Be sure that the device and PC are on a same network before running the installation.
ITC Series ITC6500 Series Installation Guide 6.1.2. Custom IP Environment IPAdminTool is a management tool, which automatically scans all of the network products for users to perform administrative tasks, which includes network configurations, firmware update, device reboot, and device organizations. To modify the device’s default IP address for customized network area;...
ITC Series ITC6500 Series Installation Guide 6.2. View video on web page Type the proper IP address to view the live streaming images through a web browser. The default username and password is root / pass. 6.2.1. ActiveX Installation When the browser asks to install the AxUMF software, click Install to proceed. When Setup installation pop-up window appears, click Install to proceed with rest of installations.
ITC Series ITC6500 Series Installation Guide 6.2.2. View video using IPAdminTool IPAdminTool automatically searches all activated network encoders and IP cameras and shows the product name, IP address, MAC address and etc. 1. From the IPAdminTool’s product list, select the device by highlighting it. 2.
ITC Series ITC6500 Series Installation Guide 6.3. Reboot On the Device Perform the following procedure to reset your device. Press the reset button for 2 seconds when the device is powered on. Wait for the system to reboot. Do not press the reset button for more than 2 seconds. Otherwise, the camera may be switched to its factory default settings.
ITC Series ITC6500 Series Installation Guide 6.5. Safe Mode What is Safe Mode? There may be certain occasions that your camera repeatedly fails to boot. Then, your camera may enter safe mode to be recovered from the occasions. What may have caused Safe Mode? Here below are the main typical causes.
ITC Series ITC6500 Series Installation Guide Electrical Characteristics Power Source DC 12V (CLASS 2, LPS)/ AC 24V / PoE IEEE802.3af (Class 0) Power Consumption Max 10W@12VDC Audio Input MIC in, Max2Vp-p, 20K Ω (90dB) Audio Output Line out, 60mW, 16 Ω (95dB) Max 50mA@5VDC, TTL level 1.5V threshold D/O 1 Max 1A@30VDC...
ITC Series ITC6500 Series Installation Guide APPENDIX (B): DETECTION RANGE *The detection range is of the maximum values. (Unit: meter) ZNT1-HET14G / ZNT1-HBT14G Lens Object Identification Recognition VCA Event Detection Person 1,450 9° Vehicle 3,390 Person 24° Vehicle 1,375 Person 42°...
ITC Series ITC6500 Series Installation Guide APPENDIX (C): POWER OVER ETHERNET The Power over Ethernet (PoE) is designed to extract power from a conventional twisted pair Category 5 Ethernet cable, conforming to the IEEE 802.3af Power-over-Ethernet (PoE) standard. IEEE 802.3af allows for two power options for Category 5 cables. The IEEE 802.3af-2003 standard allows up to 15.4 W of power the device.
ITC Series ITC6500 Series Installation Guide APPENDIX (D): DIMENSIONS (Unit: mm) CBC AMERICAS CORP. - EAST COAST +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600 | MEXICO +52 (55) 5280-4660 ganzsecurity.com. 01/17...
Page 27
ITC Series ITC6500 Series Installation Guide APPENDIX (E): HEXADECIMAL-DECIMAL CONVERSION TABLE Refer to the following table when you convert the MAC address of your device to IP address. CBC AMERICAS CORP. - EAST COAST +1 (919) 230-8700 | WEST COAST +1 (310) 222-8600 | MEXICO +52 (55) 5280-4660 ganzsecurity.com.