Hotpoint HM31AAE Service Information page 20

Indesit Company
C) Removing the Fan
1. Remove the 2 plugs covering
the screws.
2. Remove the 2 screws securing
the fan.
3. Unplug the fan from its power
supply.
D) Replacing the Light (Dismantling the Light Holder)
1. Use a slip screwdriver to lift up the outer cover over the light holder screws.
2. Remove the outer cover.
3. Using a slim screwdriver to remove the 2 screws securing the light holder.
This will give direct access to the light and light holder connector, if it needs to be replaced.
Service Manual UK
1
3
20 of 29
1
2
2
English
3
4