Hotpoint HM31AAE Service Information page 13

Indesit Company
DESCRIPTION OF ALARMS
A1 and A2 FREEZER TEMPERATURE ALARM:
There are two types of alarm as on current models: A1 (minor) and A2 (critical). Each alarm has a
display message and a constant beep.
Temperature alarms are disabled for the first 24 hours of appliance operation (only the first ever 24
hours, not every time it is switched on).
To silence the beep, open and close the FRIDGE door or press the change Freezer Temperature keys.
To set the alarm, switch the appliance off or press the change Freezer Temperature buttons twice.
The buzzer doesn't have to be silenced and reset at the same time. One can happen some time after
the other.
Super Cool or Super Freeze options are disabled during a temperature alarm and nothing will happen
when the relative keys are pressed. When the alarm situation has been rectified, the target temperature
set by the user will be shown again.
NOTE: - In the event of a power failure when an alarm has occurred, if it was a temperature alarm it will
be present immediately when the time is reset with the door open (meaning it will be shown again after
2 minutes).
Service Manual UK English
13 of 29