Table of Contents
Advertisement
RANGE CONTROL PANEL
Styling may differ depending on the model you selected.
ELECTRONIC CLOCK AND OVEN CONTROL
The electronic clock and oven control on your
Cancel
Pad
Maytag range is used for the time-of-day dock,
Press this pad to cancel all operations except the
timer, bake, broil, delay start and self-clean
time-of-day clock and timer. If you are ever
functions. A beep will sound each time a
unsure if you've programmed
the control
function pad is pressed. At the end of an
correctly, press the CANCEL pad and start over.
operation, consecutive beeps will sound.
The display on the control will blink when power
Set Knob
is first supplied to the range or if there is a power
Turn this knob in either direction to enter the
failure. Once the time-of-day clock has been set
time or temperature desired. This knob is also
(see Setting the Clock, page 6), the display will
used to select Hi or Lo broil.
stop blinking.
Timer
Pad
The timer can be set from 5 seconds to 9 hours,
ONLY. Ira fault code (F plus a number, ex. F1)
50 minutes. It will count down by minutes (when
appears in the display along with a continuous
set for 1 hour or more time) or seconds (when
beeping sound, press the CANCEL pad. See
set for less than i hour). See page 6 for
Before You Call for Service (page 9.4) if the
instructions on setting the timer.
fault code reappears in the _splay.
Clock
Pad
The following pads and knobs are found on your
Use this pad to set the time-of-day clock. For
Maytag electronic elock and oven control:
instructions to do this, see page 6.
PAGE 5
Advertisement
Table of Contents
