Removing Range For Cleaning And Servicing; Storage Drawer - Maytag CRG9600AAL Repair Manual

Removing Range for Cleaning Storage Drawer
and Servicing
The storage drawer at the bottom of the range is
a safe and convenient place for storing metal and
When necessary, follow these procedures to glass eookware. Do not store plastic, paperware,
remove the appliance for cleaning or servicing: food or flammable material in this drawer.
1. Shut off the gas supply to the appliance. Remove the drawer to clean under the range.
2. Disconnect the electrical supply to the
appliance. To Remove the Drawer
3. Disconnect the gas supply tubing to the Empty the drawer then pull it out to the first
appliance, stop position. Lift up the front of the drawer and
4. Slide the range forward to disengage the pull it to the second stop position. Grasp the
range from the anti-tip bracket. (See the sides and lift up and out to remove the drawer.
Installation Instn_etions for location of the
bracket.)
TO Replace the Drawer
5. Reverse the proeedure to reinstall. If the gas Fit the ends of the drawer glides onto the rails.
line has been disconnected, check for gas Lift up the drawer front and gently push in to
leaks after reeonneetion. (See the Installation the first stop position. Lift up the drawer again
Instructions for the gas leak test method.) and continue to slide the drawer to the dosed
position.
PAGE 23